But when i show vlan on Cisco, there was no vlan192 updated from Dell to Cisco, we have the same configuration in other site but everything works well.
The question is ... how to make Cisco updated Vlan192 ? or do i have to create vlan192 again on my Cisco switch ?
Is VLAN 192 created om the Cisco switch. Your configuration looks correct on the N3024. Is the iSCSI traffic tagged? If you assign an IP address to the VLAN on the N3024 can you ping it from devices attached to the Cisco switch?
We didn`t create any vlan on Cisco side last day, there was no tag on uplink ports as well. All uplink port s are in Trunk mode, allow trunk vlan 192.
Yesterday, I created the vlan on Cisco then it works for us ..... Normally, we just use Cisco with VTP located on server Cisco ... Vlan between Cisco/Dell to Sites work for us so far.
But i`m not happy with the speed as ping with TTL <=1ms, we assigned the ip address to VLAN on our Colt`s MPLS router, it that a reason for TTL = 1ms ? ( Colt router connects to Cisco Core switch==> Cisco Core connects to Dell N3024 ==> connects to Vlan host)
A question, is it ok with your view if i migrate the IP Address of Vlan from Colt`s router to Dell N3024 to optimize speed ?
DELL-Josh Cr
Community Manager
•
9792 Posts
•
45323 Points
1496
0
Posted December 3rd, 2014 10:00
Hi Hrzr,
Is VLAN 192 created om the Cisco switch. Your configuration looks correct on the N3024. Is the iSCSI traffic tagged? If you assign an IP address to the VLAN on the N3024 can you ping it from devices attached to the Cisco switch?