CarlosRojas

updated

15 years ago

C

CarlosRojas

1 Rookie

•

1693 Posts

0

7529

January 4th, 2012 21:00

Is there any MIB file developed for NetWorker for the SNMP traps?

Hello all,

I need to integrate NetWorker Alerts/Reports with an alerting software and I was wondering if there is any MIB (Management Information Base) files we could look into. As far as I know there were no such files in previous versions of NetWorker, but I was wondering if any of you know if these are now created or NetWorker is still sending just SNMP traps for alerting/monitoring scenarios.

Any further information would be much appreciated.

Thank you.

Carlos.

  • CarlosRojas

    1 Rookie

    •

    1693 Posts

    1786

    0

    Posted August 27th, 2012 00:00

    Hi Thierry,

    There are not such MIB's for NetWorker.

    Usually MIB's are intended for Hardware Monitoring/Alerting, so unfortunately there are not any MIB available for NetWorker.

    In our case we eventually went for DPA (EMC Data Protection Advisor) which indeed has some MIB's available, and DPA will monitor both HW and SW, including NetWorker.

    DPA has much more monitoring capabilities, such Virtual environments, HW (switches and SAN switches), Storage,  Data Domain, EDL, PTL, VTL, etc.

    Before putting DPA in place we just created some notifications via e-mail, and then we configured our ticketing tool to receive those emails and translate them into a valid ticket (for example in case of a backup failure).

    Thank you.

    Carlos.

  • CarlosRojas

    1 Rookie

    •

    1693 Posts

    1786

    0

    Posted January 4th, 2012 21:00

    Hello all,

     

    Actually I found this post https://community.emc.com/message/294870#294870, but I don't have access to emc70293. Could any of you please provide with that information?

     

    Thank you.

    Carlos.

  • masonb

    445 Posts

    1786

    1

    Posted January 5th, 2012 00:00

    Carlos,

    here is the Article, but it would appear to be specific to CLARiiON and Navisphere, but may give you assistance in creating the MIB you need: -

    Question:

    How can I enable my CLARiiON array to respond to SNMP inquiries without Navisphere Event Monitor?

    Question:

    Can I compile a MIB on a SNMP management station to translate traps sent from a CLARiiON array?

    Environment:

    EMC SW: Navisphere Event Monitor

    Environment:

    Product: CLARiiON CX Series

    Problem:

    CLARiiON array does not respond to SNMP inquiries.

    Problem:

    Using Navisphere Event Monitor to send SNMP traps to SNMP station. A MIB file is required to translate the meaning the trap on the SNMP station.

    Fix:

    The Fibre Alliance (FA) MIB can be compiled into CA-Unicenter or Tivoli NetView so that these programs can decode traps sent from Navisphere Event Monitor. The latest version of HP OpenView can receive SNMP traps from Event Monitor without having to compile the FA MIB. Once an SNMP trap has been generated, it is up to the management software to receive and interpret the trap. For more information, see the "Managing EMC CLARiiON with SNMP" White Paper on Powerlink for more information on the FA MIB.

    You can also install the CLARiiON MIB in the linked Zip file on a CLARiiON storage processor (SP) to enable it to respond to SNMP inquires if you do not have Event Monitor on your management station. Your management software would still require the compiled FA MIB to decode the trap that it receives from the CLARiiON array. Also, included in the Zip file is a document that describes the fields that are currently available for query requests from the CLARiiON implementation of the FA MIB.

    Click this link to download the CLARiiON MIB file. Open the Zip file or save it to disk and then extract the CLARiiON MIB.

    The zip file is attached.

    Regards,

    Bill Mason

    1 Attachment

  • CarlosRojas

    1 Rookie

    •

    1693 Posts

    1786

    0

    Posted January 5th, 2012 00:00

    Hi Bill,

    Thanks for the info, it will indeed help me to plan the notifications, although I'm not sure if we could arrange some MIB's like this for NetWorker.

    I'll look into it.

    Thank you.

    Carlos.

  • Thierry101

    2 Intern

    •

    326 Posts

    1786

    0

    Posted August 26th, 2012 21:00

    Hi Carlos

    Did you have any luck finding MIBs for Networker? Googled but nothing much...

  • Thierry101

    2 Intern

    •

    326 Posts

    1786

    0

    Posted August 27th, 2012 13:00

    Thanks for the info Carlos...