When I trying to add client(IP address used as a name of client) using wizard the error message shwos me "Unable to connect to host. Please check Networker Security Settings and daemon logs on nwserver and console"
So the client daemon is busy and it answers correctly on the requested port.
Now let's see whether you are on the correct machine:
C:\>nsradmin -p nsrexec -s VG-ASMOSS1
NetWorker administration program.
Use the "help" command for help.
nsradmin> . type: nsrla
nsradmin> p
Verify the hostname and IP address.
Run nsrlookup and verify whether the result is the same.
But in general, the client must not be able answer to create a client - a 'fake' in the hosts file will already do the job (very convenient when you want to recover from de-commissioned clients).
In this case you must be able to create the resource at least with 'New Client Properties'. Please try that.
However, the client must be able to answer when you want to use the Wizard - at least when you want to browse the client's file system to select the save set(s).
crazyrov
6 Operator
•
1319 Posts
1730
0
Posted July 1st, 2014 08:00
Have you added a hosts file entry for the client on the NetWorker server and vice versa ?