UNSOLVED

nmitchell1185

updated

5 months ago

N

nmitchell1185

1 Rookie

•

2 Posts

•

2 Points

0

269

March 11th, 2026 13:00

U4323QE no Auto-KVM

I just recently bought a new U4323QE monitor to run both my work laptop and my personal desktop on. I was under the impression that it was capable of auto-KVM based on the description mentioning auto-KVM. I have also tried using the split-screen option, but it will only allow me to use a single input and not assign different inputs to different areas (i.e. laptop to top two and desktop to bottom two). Am I missing something, or am I stuck getting an external KVM since reaching behind the screen every time is a pain?

  • DELL-Daniel V

    Community Manager

    •

    922 Posts

    •

    5303 Points

    0

    0

    Posted March 11th, 2026 17:03

    I'd recommend taking a look at page 58 in the user guide. Select the option to Show KVM Setup Guide to ensure you're correctly set up. 

    DELL-Daniel V
    #IWork4Dell
    Digital Support Forum Liaison

    New to Community? Check our FAQ!

  • nmitchell1185

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted March 11th, 2026 17:12

    @DELL-Daniel V​ I did that when I first hooked everything up. The problem is, I don't think Dell does a very good job at describing what they mean by auto-KVM. They make it seem like you can have PBP set up and just move the mouse between inputs seamlessly. But what they really mean is that it will auto-switch the keyboard and mouse when you switch inputs. 

    Even the seamless KVM transition option for side-by-side PBP doesn't work as advertised. 

    Unfortunately, I think my only option to get what I want (seamless KM transition between inputs in PBP mode) is with an external KVM. We had Dell UltraSharps at my old job set up so two devices had two video inputs running to the monitor and USB cable running to an external KVM. The KB and M were plugged into the KVM and then there was a USB cable going to the monitor. I could just move my mouse between all four inputs and it would change which system I was working on seamlessly. 

  • Jackie Zhu

    1 Rookie

    •

    1 Message

    •

    5 Points

    0

    0

    Posted June 15th, 2026 07:07

    @nmitchell1185​  I got the same question. I tried many methods. Finally, I downloaded “Dell's Disply Manager ” on both hosts and made the necessary settings to enable one keyboard and mouse to control and switch between hosts on the same screen. It's just not that smooth