U3818D, two sources, PBP picture fill not out 1/2 of display
Hi guys.
I have a problem with my new U3818DW monitor.
I would like to work with two input sources in the PBP (picture-by-picture) mode.
Desktop (private) ---> via HDMI 1 input ----> forced one side in PBP mode Laptop (company) ---> via DP or HDMI 2 input ----> forced on the other side in PBP mode
I have installed the DDM (Dell Display Manager) on both devices.
My private Desktop is able to filled out 1/2 of the monitor complete (1920 x 1600)
The company Laptop not. On this 1/2 of the monitor, the picture will only show scaled down in the center of half monitor.
If am switching on/ off the PBP the private Desktop changed automatically the mode 3840x1600 to 1920x1600.
It works perfect. 1/2 monitor side is complete filled out.
The company Laptop shows that the mode is change to 1920x1600 but it does fill out the complete half of the monitor.
I have tested some things but on the Laptop it doesn’t work.
Could be the problem that I have no admin rights on the Laptop? The IT department installed the DDM but I have no admin rights on the Laptop.
I do think that DDM software will help positioning app for 1 computer.Since you are using PbP, you need to find find a driver for both PC so you can change the resolution to 1920x1600 so that both can feed the screen on both side of you screen. (check Nvidia, ati, intel driver and or their forums.
By default each computer will set their resolution to what the screen can do so (3840x1600).
The scaling should be adjusted in the video card GPU settings, not the Windows Display settings.
Hello, is there any solution for the problem? I have the same issue. In 1/2 PBP Mode my Notebook screen is not shown correctly U3818DW Display and does not fill out the full 1/2 Screen. But If I open the notebook and the notebook determines 2 active displays in enhanced display mode, it is scaling correctly to the 1/2 PBP size to 1920x1200. I can see in WIN11 the desktop mode and the signal mode is matching 1920x1200. But when I close the notebook and it's automatically switching to external main display it's scaling down the display. In the dispaly settings of WIN11 I see in the resolotion settings: Desktop Mode: 1920x1600 and in the signal Mode 3840 x 1600,. The different resoultions are resulting in a smaller scaled display. How can I change this? I cannot change the signal mode which is determined automatically? As a workaround I let the display of my notebook open but this is not efficient as I have to move the windows manually to the Monitor screen and it consumes more power. Best Regards INXS01
vinco2
5 Posts
2529
0
Posted March 22nd, 2020 08:00
Hello
I do think that DDM software will help positioning app for 1 computer.Since you are using PbP, you need to find find a driver for both PC so you can change the resolution to 1920x1600 so that both can feed the screen on both side of you screen. (check Nvidia, ati, intel driver and or their forums.
By default each computer will set their resolution to what the screen can do so (3840x1600).
The scaling should be adjusted in the video card GPU settings, not the Windows Display settings.