U2725QE, MacBook Pro M4, can't update the firmware
Hi everyone,
I’m trying to update my Dell U2725QE monitor from firmware version M2T101 to M2T102, but the update fails every time. I’m using a MacBook Pro with the M4 chip, running the latest version of macOS.
The update tool detects the monitor correctly and shows that the M2T102 update is available. However, when I click Update, the process runs for a moment and then stops with an update error. The firmware never starts installing.
I’ve tried:
reconnecting the USB-C cable (directly, no adapters)
restarting macOS
closing Dell Display Manager before running the updater
Nothing worked so far.
Has anyone encountered this issue or found a workaround?
@DELL-ChrisM2Update: I updated my MacBook to Tahoe 26.2 overnight and tried again today, and the U2725QE firmware update was successful on the first try. So great news there.
One subsequent issue I ran into: Immediately after updating the firmware, the display would not recognize the Thunderbolt-C connection. It started intermittently dropping out, and then after trying to reconnect the cable, it would not connect at all. This persisted after repeated attempts to connect/disconnect the TB cable. Finally, I tried a full power-down/up cycle on the monitor (unplug the power cable, hold down the power button for 8 seconds, then reconnect the power cable), and the issue resolved.
Hopefully, this helps others experiencing the same issue.
@DELL-ChrisM2 This points to a different issue/error message than what @tombakand I are experiencing. Please see my comment on the original post for more info.
I'm having the exact same issue with this monitor on my M3 Macbook Air on MacOS 26.1 - just as you described. I've tried all the same troubleshooting as you, with the addition of:
- Uninstall/reinstall DDPM
- Disconnect and full power-down and restart of the display (unplug and hold down the power button).
Good work! Any time a monitor firmware update is run, I recommend = unplug the power cable, hold down the power button for 8 seconds, then reconnect the power cable
EG209
1 Rookie
•
3 Posts
•
2 Points
0
0
Posted December 18th, 2025 01:34
@DELL-ChrisM2 Update: I updated my MacBook to Tahoe 26.2 overnight and tried again today, and the U2725QE firmware update was successful on the first try. So great news there.
One subsequent issue I ran into: Immediately after updating the firmware, the display would not recognize the Thunderbolt-C connection. It started intermittently dropping out, and then after trying to reconnect the cable, it would not connect at all. This persisted after repeated attempts to connect/disconnect the TB cable. Finally, I tried a full power-down/up cycle on the monitor (unplug the power cable, hold down the power button for 8 seconds, then reconnect the power cable), and the issue resolved.
Hopefully, this helps others experiencing the same issue.
(edited)