Hi all I have a refurbished 2000fp (traded my new 2000fp in because after 3 months of use it went blank constantly on account of that DVI problem, gave Dell 3 months to fix it, but I guess they had other more important issues to address.) Anyway, every now and then I get a horizontal line of pixels that flash on my screen, they usually are green, this normal happens with when I am viewing animated gif’s and occasionally across my ATI TV controls. Is there a fix for this problem or did Dell screw me again and sent me a monitor on the verge of getting lines of dead pixels?
Are you using the Nvidia-based video card that was factory-installed within your Dimension 8200 system, or an ATI card? If you are using an Nvidia card, try updating your drivers to the latest available Detonator driver package on the
Nvidia site.
If you are now using an ATI card, ensure that you have updated to the latest Catalyst driver package available on the
ATI site. Within the Advanced settings under the Settings tab of the Display Properties, ensure the box that mentions reducing DVI frequency on high-resolution displays is checked.
I have an ATI all in wonder 9800 and checked the DVI frenquency box you instructed me to, i then recieve a box that said "selectioning this option will run the DVI interface at unsupported speeds, you may expirence display corruption or no image, do you wish to continue" I checked yes. If this dosent solve my issue or expirence trouble ill post again.
I'm having the same problems as Shaggi, same monitor, DVI connector, but with the ATI Radeon 9800 XT card, current drivers. I also saw the warning about "DVI used at unsupported speeds" when the settings option is checked, and I backed off. What does this warning really mean, and under what conditions would this option affect performance (i.e. what are the "unsupported speeds"?
Also, the display is blank occasionally after restart/startup. If I turn the monitor off/on without rebooting, the Windows desktop appears normally. Could this be related to the horzontal lines in the display?
-
What does this warning really mean, and under what conditions would this option affect performance (i.e. what are the "unsupported speeds"?
It is unclear as to what this option actually affects, as
ATI's own Infobase article on the problem has no further data on this option. Those with the problems you have been experiencing and who have selected this checkbox report no reduced functionality or blurriness in the resulting image.
-
If I turn the monitor off/on without rebooting, the Windows desktop appears normally. Could this be related to the horzontal lines in the display?
I have no concrete data relating these problems yet, although I would say that the issues are related. I am currently gathering additional information that I may pass along to Dell Engineering (from this thread and many others), and hope to have some information available to post to the forum soon.
DELL-Cody
2 Intern
•
2166 Posts
259
0
Posted April 23rd, 2004 16:00
If you are now using an ATI card, ensure that you have updated to the latest Catalyst driver package available on the ATI site. Within the Advanced settings under the Settings tab of the Display Properties, ensure the box that mentions reducing DVI frequency on high-resolution displays is checked.