UNSOLVED

silke01

updated

18 years ago

Closed

S

silke01

7 Posts

0

10803

July 6th, 2008 10:00

DISPLAY PORT connector on Dell 2408WFP will not awaken once Windows enters sleep mode (picture shown)

Ideally can a Dell rep such as DELL-Jimmy_P or DELL-Chris_M offer their resolution for this problem.

 

I'm an Australian customer 'fortunate' to have a 2408WFP monitor, video card, and Dell's supplied cable to make use of the new DISPLAY PORT video connector standard. The display works perfectly until the monitor enters SLEEP MODE (e.g. is turned off after the set amount of time under Windows Power Schemes). Once that happens no amount of keyboard or mouse activity will awaken the monitor. I have to power cycle my PC to get the monitor to display again.

 

Other people post the same problem with their 2408WFP on the DVI ports however in my case this problem exists for the DISPLAY PORT only. If I use the monitor's DVI or VGA connectors the monitor will awaken from sleep mode after keyboard or mouse activity as per normal.

 

I have two 2408WFP monitors setup to display in dual view mode. Interestingly, when the DISPLAY PORT connected monitor enters sleep mode and does not awaken from k/b & mouse movement, I can recover that monitor if the second display is connected via a DVI port (so I can still see half of the Windows desktop). By opening NVIDIA Control Panel I can force the DISPLAY PORT connected monitor to wake up again by renewing the "Set up multiple displays" configuration. It works, but is obviously a very undesirable work-around just so this premium Dell monitor will wake up from sleep mode without having to reboot the O/S.

 

Please, no replies of don't use the Display Port connector or set "Turn off monitor" to NEVER in Windows Power Schemes. What I need from Dell is a firmware update to fix this issue (for example revision A01).

I could apply it myself using softMCCS "Flash update firmware" feature assuming Dell's firmware update is compatible with this program. Failing that can Dell replace or update my A00 monitors with A01 version (or whatever firmware update is required to fix this issue)?

 

Dell - my monitor s/n and customer information is available in my Forum account details.

 

Cheers

 

Update: Actually the problem is more prevalent than I realised and highlights this fault with Dell's monitor. As soon as you press the monitor's input button to cycle through the monitor's display ports, the display on Dell's DISPLAY PORT interface is lost and will not return unless I reboot the PC or force it to be redetected via the NVIDIA Control Panel "Set up multiple displays" configuration work-around (using a second monitor to see what I'm doing). The same thing happens if you turn the monitor OFF then ON again - the display port will not wake up.

 

 

Dell 2408WFP (left monitor using Display Port) - no display

[picture is 1.7MB]

http://img2.freeimagehosting.net/uploads/a08bbd57cc.jpg 

 

Monitor: Dell Ultrasharp 2408WFP 24"
Monitor ports tested: DVI, VGA, Display Port & Composite
Video card driver version: 6.14.11.7516 (GeForce Release 175 WHQL for WinXP & WS2003 x64)
Video card: NVIDIA GeForce 9600GT (Gainward BLISS9600GT PCX 1GB DisplayPort
“Golden Sample")
O/S: Windows Server 2003 R2 SP2 x64 Edition

Message Edited by silke01 on 07-07-2008 09:02 AM
No Responses