UNSOLVED

ankydu

updated

19 years ago

A

ankydu

1 Rookie

•

7 Posts

0

72517

May 21st, 2008 17:00

Dell SP2208WFP Webcam having problem

Hello All,

 

This my first post in this forum. I recently purchased Dell's SP2208WFP monitor with webcam. Everything is working fine except the webcam. I installed the Dell Webcam Software and driver from the Provided CD and rebooted the system after completion of setup but when I rebooted and launched the Dell Webcam Center Software it displays a message -"No supported webcam drivers detected. Please install the webcam drivers using the Dell Resource CD and launch Webcam Center again." I tried everything including reinstalling the software from CD and also downloading the setup from Dell's support site. But nothing works. Also under device manager it is listed as "unkown device". But in windows if I unplug the USB cable either from monitors back or from the back of my system, and reconnect it is recognized and installed and works. But again after a restart it dosent work unless again disconnected and reconnected. Also during the installation of webcam software the setup asked to make sure that the cam is connected and again it could continue only after disconnection and reconnection. I also have a printer, a bluetooth dongle and all work fine on all my systems usb ports. I am running windows XP with SP3. PLease help.

  • offmom

    2 Posts

    1309

    0

    Posted May 22nd, 2008 15:00

     I have a problem with the same monitor.  The web cam doesn't work.  I have spent several hours with tech support and they said I have to reinstall windows.  I don't have a Dell tower and so I think that they gave up.  I don't think this is a reasonable solution since there are many others on the internet who have a problem with this monitor.

    I have installed and reinstalled the drivers, unplugged and plugged in to a different USB port, and let the tech take over my computer.

    In the device manage driver properties I have gotten code 19, and now I get a code 39. Since I noticed this there is also a yellow dot over my dell printer in the imaging devices in the device manager.  There does not seem to be a problem with it, I tried the same steps with this as I did with the webcam just to get rid of the dot and it could not be resolved. 

    I used to have a logitech camera before I got the new monitor. I deleted it, but maybe there is something with that.

    I am hoping what helps you will help me.

     

     

  • Chronus102

    1 Message

    1309

    0

    Posted May 24th, 2008 03:00

    I'm glad that i'm not  the only one with this issue, but either dell will get this working (i just got this really nice XPS 420, and decided to stick with Vista) or they will be getting me a monitor that will work to its full functionality, expectially after droping 2000 bucks on this setup.  that being said, i have a few more things to try out, and if they work i'll let you guys know what i did.
  • DELL-Jimmy P

    2 Intern

    •

    1542 Posts

    1309

    0

    Posted May 27th, 2008 15:00

    ankydu

     

     Try installing the latest directX from Microsoft.

  • ankydu

    1 Rookie

    •

    7 Posts

    1309

    0

    Posted May 28th, 2008 04:00

    Dear Jimmy_P. Thanks four ur kind advice, but that didn'd help. I have updated directX but still its the same problem.
  • offmom

    2 Posts

    1309

    0

    Posted May 28th, 2008 11:00

    I tried it, too, and it still did not work. 
  • DELL-Jimmy P

    2 Intern

    •

    1542 Posts

    1309

    0

    Posted June 20th, 2008 14:00

    loumaserati

     

     What operating system are you running, XP, Vista or something else?

  • 1309

    0

    Posted June 20th, 2008 14:00

    When attempting to use the webcam it comes on and i get a pic for a few secs and then the computer shuts down and starts back up again.I've tried all the solutions listed here and then some to no avail. I get an error message referring the the webcam console. Also when the wizard attempts to install the new hardware, it can't find it, even with disc in the computer.Help! thanks Lou

     

  • DELL-Jimmy P

    2 Intern

    •

    1542 Posts

    1308

    0

    Posted June 20th, 2008 17:00

    Go to system properties (right click on my computer and select properties), go to the advanced tab, select startup and recovery, uncheck Automatically restart. The next time you do what ever it is that is causing the system to restart you should get a blue screen instead. Copy the error on the blue screen including the hex code and post it here. You will have to hold the power button down on your system until it shuts off to get out of the blue screen.
  • 1308

    0

    Posted June 20th, 2008 17:00

    XP
  • 615

    0

    Posted June 20th, 2008 20:00

    OEM03Cvw.dll,ctCVWConsoleRunDLL32EP /stay Monitor Integrated Webcam
    this is the one i get when i open the console it stays up
    when i open the cam evrything shuts down