UNSOLVED

smoki

updated

20 years ago

S

smoki

3 Posts

0

13753

March 10th, 2007 15:00

Dell 2407 not coming on

Hi This sounds like a strange problem but I have had a Dell 2407 for about 2 months now with no issues. 30 minutes ago it has decided to go into what is almost like a power save / start up screen. It keeps cycling with a blue Dell screen and nothing else. Only on for about 2-3 seconds and will not let you power off or change inputs etc. I have power cycled it etc. but to no avail. I have also tried different inputs but it seems stuck on input 2 (DVI) HELP !!! Thanks
  • prius04

    22 Posts

    113

    0

    Posted March 10th, 2007 20:00

    Just a shot in the dark but......

    Have you tried unplugging the monitor? I just "installed" a wireless remote on/off unit and discovered there's a bit of a difference between turning the display on and off using the display's power button versus "interrupting" power to the display. At least try unplugging it since doing so might get the thing out whatever funk it's in at the moment.
  • smoki

    3 Posts

    113

    0

    Posted March 10th, 2007 21:00

    Yeah

    The only way to turn the power off is to to take the power lead out......
    None of the buttons on the monitor work....
    It just keeps doing this weird cycling every 2-3 seconds....
    Can't turn on or off in normal way.....
    You just get a blue Dell logo in middle of screen for 2-3 seconds then it power cycles again......

    Strange
  • smoki

    3 Posts

    113

    0

    Posted March 11th, 2007 20:00

    No one any ideas on this????

    Was hopefully looking for one of the Dell guys to answer....

    Thanks
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    113

    0

    Posted March 15th, 2007 14:00

    smoki,

    * While troubleshooting, the monitor power cord should be plugged directly into a wall socket (no UPS or surge protectors)
    * Turn the monitor off
    * Hold down the Menu button and the plus button
    * While holding the other two down, press the power button. Wait for the DVI connector graphic to disappear
    * Release all buttons
    * Press the minus button. Does anything appear?


    DELL-Chris M (old account)

    #IWork4Dell