Bug in DUCCS X-Rite for Mac in connection with at least UP3214Q and UP2414Q
Hi,
user Itaki and i have encountered a show stopping bug in the DELL branded Mac version of X-Rites 1Profiler software specific to the DELL bundles including an i1 Display.
The DUCCS (Dell UltraSharp Color Calibration Solution) doesn't detect USB connected displays, It does see the connected i1 Display hardware (funnily enough in my case connected directly to the USB hub inside the monitor) but not the monitor itself, making the whole point of this type of monitor a bit moot (ignoring 4K for a moment).
This has nothing to do with Dell not supporting Apple and all that usual flaming. This is an official DELL software provided for Apple users and it doesn't do the most basic thing - recognising the DELL display via USB.
The original version straight from X-Rite works flawlessly, detecting the monitor. Booting to Windows via Bootcamp and using the windows version of DELL USCCS works as well without complaints.
This has been going on since Maverick 10.9.4 at least and continued straight to Yosemite 10.10. PLEASE restore this basic functionality. 1Profiler is no alternative, as it doesn't provide the special UP3214Q sauce, ADC, Uniformity compensation or writing settings to CAL1 and CAL2. For the advertised purpose and the money involved, that's not a reason to recommend DELL.
Btw. user Itaki has confirmed this bug on several Apple hardware with his UP2414Q.
When installing the software it the problem is listed under "known problems". For me on Win8.1 it worked disconnecting power to the screen after it failing to connect, reconnect power and then retrying.
I have the exact same problem. replacing the display by Dell unfortunately did not solve the problem.
Booting in bootcamp works flawlessly, I can calibrate with DP 1.2 switched on (some people suggested that this could be the problem).
In OSX 10.10 the display can be calibrated only when connected through HDMI. This is not an option, since I only get 30Hz in 4K and the Hardware LUTs are different depending on the connection (which means, I cannot calibrate via HDMI and then use DP).
It is very frustrating not being able to use an important feature of the display (hardware calibration).
I understand that it is Dells responsibility to fix the bug and possibly bring the calibration solution to version 1.5.6, which is where the official x-rite software is.
I just bought a UP2414Q monitor, and have discovered that calibrating it is pretty much out of the question at the moment - which defeats the purpose of buying this monitor. I'm going to contact Dell support to see if there's a fix, but most likely I will be returning the monitor if there is no solution.
@ JSTEVENS79: Please report how Dell support responded.
But honestly, it seems like we have to make some more noise for Dell to wake up. I've contacted TFT Central and they've already updated their reporting to reflect the issues at hand. It surely makes me think twice to recommend Dell monitors for this type of work, let alone buy another Dell. It's not like these monitors are your run of the mill stuff for 200 bucks...
I had not tried that version yet. I couldn't find it available on Dell's website. I installed it, and it wanted me to 'upgrade' to 1.5.6. haha
I was able to connect to the calibrator finally! The only thing I haven't gotten working yet is the uniformity settings. I choose the setting for it prior to calibrating, but it never takes any measurements. That might be a user error on my part, but at least it's connecting, which is a huge step in the right direction.
Just like JSTEVENS79 at every start version 1.5.7 wants to upgrade 1.5.6.
Sadly, for me it stops at Step 1 of 6 with following message:
"Could not set the display's default luminance. Error communicating with the display. Please verify the USB connection. Power cycle the display, restart the application and try again."
That's a step forward compared to the previous available version 1.5.3.
I will try different settings, but for v1.5.7 to keep asking for 1.5.6 doesn't inspire confidence, to be completely honest.
I was able to fully calibrate my monitor without any trouble - after setting it to advanced and choosing the correct screen type and color space. Took about 20 minutes to do a full calibration, and it worked great.
I made it through the first time with luminance working, but subsequently have gotten the same error every time since. ('Could not set the display's default luminance...') Hopefully there is a fix for this soon. Seems like it's very close to working properly.
LUXIIUS
5 Posts
976
0
Posted November 17th, 2014 05:00
I'm having the exact same problem, but on Windows 8.1 (with UP2414Q).
If anyone has a solution for this, please let me know.