
UNSOLVED
Closed
XPS M1330 MEMORY UPGRADE / INSTALL ISSUES
Hi,
Since almost 8 months I have been using XPS M1330 with XP PRO, 3GB ( 2GB + 1GB = 2MODULES) memory ( came from DELL). I never had any issues and O/S is recognizing the 3GB memory.
Recently I bought another 2GB - 667MHZ & DDR2/200PIN module and replaced with 1GB existing module.
When I reboot it, it asks for memory change confirmation press F1. Everything went thru fine but my computer is not recognizing the newly added module once it is booted. It shows only 2gb MEMORY.
I thought the new module is corrupted, and I have replaced with old 1GB module, now it is recognizing only 1gb memory. I did not touch the old 2GB module from that slot though it is not recognizing it.
Could some one tell me why I am getting this issue?? So far I never had any issues with my LAPTOP.
Responses (5)
Solutions (0)
DiscountTech
22 Posts
723
0
Posted October 17th, 2008 19:00
Yes, reseat all memory modules. Remember to push them all the way into the slot. There should not be more than a sliver of gold contacts visible once you do it. Then push them down securely until both clips click on each module.
If you boot to BIOS, it will show each module if they are seated correctly.
Windows Vista 32-bit will only recognize 2-2.5gb of RAM as useable. It will show that there is a total of 4GB RAM installed though.
Also keep in mind that Vista will allocate extra system RAM to the video RAM. There is no getting around this or disabling it in any setting whatsoever.
DiscountTech
22 Posts
723
0
Posted October 17th, 2008 21:00
I guess it depends on the model. I've seen gaming rigs show from 2.5 - 2.75GB available to laptops showing 3.75GB. It all depends.

X3lectric
2 Intern
•
146 Posts
723
0
Posted October 17th, 2008 18:00
upgrading memory can give errors first time around and ask you to reseat the dimms.
Make sure theire well seated and reboot once or twice untill laptop bios clicks in and boots with new memory.