johncuervo

updated

10 years ago

J

johncuervo

1 Rookie

•

2 Posts

0

447441

December 21st, 2011 19:00

XPS 15 - HDMI not work

I have a brand new XPS 15; but when i conect it to my philips plasma tv, i have not any image in my tv. I called to Dell support and the changed the mother board, but didn't work.

Please help me.

  • 41908

    2

    Posted August 31st, 2012 10:00

    I had the same issue - no signal to my external monitor when hdmi was plugged in. I finally went in to "device manager" (click windows key, type "device manager" then open device manager. I believe I went to "display adapters" and clicked on the nvidia one, right-clicked and selected "properties" and found that nvidia was disabled (I guess intel took precedence?); enabled nvidia (I think it was under the 'general' tab), and immediately my external monitor came to life! Hope this helps some other people.

  • Bay Wolf

    4438 Posts

    38353

    1

    Posted December 21st, 2011 19:00

    Click Here to get some information on how to hook up HDTV with HDMI cable.


    Below, jimco has put together a good troubleshooting list for HDMI issues.
    Thank you for putting this list together.

    I have collected dozens of tips from people about what worked for their particular combination of model, operating system, & graphics device.
    Here are my general instructions, compiled from many posts left on the Laptop Audio discussion board.

    Preliminary steps:

    1. Plug the laptop into a power source. Some of the models have a power management scheme that will not allow for HDMI audio while running on batteries. Later, after you get your HDMI audio working, if you find that it still does not work on batteries you can change your power management settings in the Control Panel.

    2. Turn off the computer and TV before connecting the HDMI cable. Later, after you get your HDMI audio working, if you disconnect the cable while the computer is running and lose your audio, try closing and then re-opening whichever program you were using that generates audio.

    3. Every time you try a different solution you should reboot the computer. HDMI audio is extremely finicky and seems to usually need a reboot.

    Make the Connection:

    1. Connect the HDMI cable to the computer and TV.  If the TV has a "DVI/HDMI" port do not use it. Use a port for HDMI only.

    2. Turn on the TV and select the HDMI port you are using. Adjust the TV settings to receive HDMI audio if any.

    3. Turn on the computer. (Optional, some people close the laptop lid immediately after hitting the power button but I am not sure why. Most people should not need to do this.)

    4. Optional. Some models do better if the TV is set to be the primary display. To set, repeatedly press Fn+F8 (or ctrl+alt+F4) to cycle through the settings (laptop display only/laptop display plus external display/external display only). Reboot the laptop.

    5. Go to Start>Control Panel>Sound>Playback tab. Make "HDMI" the default device. (If "HDMI" is not there, right click in the white area and look under "Show Disconnected Devices" or "Show Disabled Devices" and see if it is there.)

    Post Connection Problems:

    1. If there is still no option to select "HDMI' as the default audio playback device, try re-installing or updating the graphics driver, or even try an older version. The graphics driver is the driver for HDMI audio, not the regular audio driver. Some people with Intel graphics had better results by uninstalling the graphics driver, rebooting, and letting Windows look for a driver -- instead of downloading the driver from the Dell support site.

    2. Try disconnecting and then reconnecting the HDMI cable.

    3. If you are using Windows Media Player or Windows Media Center but get no HDMI audio even after it is selected as the default playback device, go to

    Control Panel>Sound>Playback tab>Audio/Playback device>HDMI>properties>Advance>Exclusive Mode and uncheck "exclusive mode".

    4. Try a different HDMI cable.

  • Bay Wolf

    4438 Posts

    38353

    0

    Posted December 28th, 2011 14:00

    i'm experiencing the same problem, same laptop.  curious if you got it figured out?

     

    i've noticed that in both the nvidia controls and windows controls, it recognizing my plasma, but no picture on the tv.  seems as though this is a common issue, yet, i haven't found a solution.

     

    thanks

     
    Did you step through any of the troubleshooting guide in the previous post?
    If not, that is a great place to start.
  • 38353

    0

    Posted December 28th, 2011 14:00

    i'm experiencing the same problem, same laptop.  curious if you got it figured out?

     

    i've noticed that in both the nvidia controls and windows controls, it recognizing my plasma, but no picture on the tv.  seems as though this is a common issue, yet, i haven't found a solution.

     

    thanks

  • 38986

    0

    Posted December 28th, 2011 15:00

    or rather, can't get the laptop to send a signal.  

  • 38353

    0

    Posted December 28th, 2011 15:00

    i have installed the latest drivers, have attempted multiple hdmi cables and ports in the tv, booted, rebooted countless times.  I've also tried adjusting the primary display (which btw is FN+F3 on this machine).

    I have an HDMI:DVI cable which always works for my monitor.  just can't get the tv to accept the signal.  

  • Busiu

    1 Message

    38986

    0

    Posted February 16th, 2012 08:00

    I have the same problem with my XPS l502x and the Nvidia 540M video card. I would appreciate a solution Dell!

  • Manolo505

    1 Message

    38986

    0

    Posted April 30th, 2012 06:00

    I have the same problem too. But i think the problem is the lcd laptop works with the intel graphic card and the hdmi with nvidia, I think both should work with the nvidia card, as the intel graphic card does not have the option for multiple displays. its funny because my wife has the inspiron 15 and the hdmi port works perfectly, it worked straight away. Please, help us.

  • johncuervo

    1 Rookie

    •

    2 Posts

    38986

    1

    Posted April 30th, 2012 12:00

    At the end, I tried with newer tvs and it have worked very well

  • 38986

    0

    Posted May 15th, 2012 18:00

    I am having HDMI issues with my XPS17 3D (L702x) It works with my oldest TV a TEVION 32" but completely refuses to work on my HANSPREE xV 37" or my LG 22" (M228WD). It completely refuses to detect the other TV's never mind suspect audio. Not impressed :emotion-12: