
Solved!
Go to SolutionResponses (16)
Solutions (0)
DELL-Jennifer K
4 Apprentice
•
1230 Posts
2843
0
Posted September 30th, 2015 11:00
Hi,
Have you tried to make changes by going to the power options in the control panel. Then select balanced after that select on change plan settings then you should be able to adjust the system brightness.
I hope this helps but if there are any other queries do reply to this post with the service tag of the system sent via private message.
Regards,
DELL-Jennifer K
4 Apprentice
•
1230 Posts
2843
0
Posted October 1st, 2015 03:00
Hi @INSPIREDQ and @DTIMOTEO,
I would ask you to provide some more information,
*How was the system upgraded?
*Before upgrading were all the drivers updated?
Also do send the service tag of the system via private message so that I can check the system details.Regards,
If you want a temporary workaround with a few small caveats, follow the guide below. It worked for me.
- Open the Device Manager.
- You can do this by pressing Windows Key + X, then selecting Device Manager in the menu that appears near the start button. (Windows key is between Fn, and Alt assuming you have the same keyboard layout as me)
- Expand the "Display Adapters" page.
- Right-click the "Intel(R) HD Graphics 4000" item.
- Click "Properties"
- Select "Update driver".
- Select "Browse my computer for driver software."
- Select "Let me pick from a list of device drivers"
- Select "Microsoft Basic Display Adapter"
- Click "OK"
- After the drivers switch over, you get the brightness controls back, but as mentioned you lose anything related to DirectX.
- Open the Device Manager.
DELL-Jennifer K
4 Apprentice
•
1230 Posts
2843
0
Posted October 2nd, 2015 00:00
Hi @INSPIREDQ and @DTIMOTEO,
I would suggest you to try the above mentioned steps and then advise the result.
Hi @BHEAD9318,
Thank you for sharing this solution.
Regards,
DELL-Jennifer K
4 Apprentice
•
1230 Posts
2844
0
Posted October 5th, 2015 00:00
Hi @INSPIREDQ,
Thank you for the reply! But is the display good with glitches.
Awaiting your reply.
Kind Regards,
I'm also having same problem (unable to adjust screen brightness) after Windows 10 update. I have XPS14 with Intel HD4000 video card. Just installed latest driver from Intel (10.18.10.4276) with no improvement. Would prefer not to install Microsoft basic display driver since I'll lose DirectX. Hoping Dell can influence an updated driver or registry edits to make this work again. Was working with an older driver on Win8.1 .

dman10000
3 Posts
3129
5
Posted November 14th, 2015 20:00
I found another thread on this issue that solved my problem. "en.community.dell.com/.../19526400"
I have Intel UMA graphics and only had to update the one registry.
I needed to change only the first line in registry: [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000] "FeatureTestControl"=dword:0000ffff
Here's a good Microsoft page on how to edit your registry file. Be sure to follow the steps to backup your registry first.
"support.microsoft.com/.../310516"