UNSOLVED

otterbay

updated

18 years ago

Closed

O

otterbay

108 Posts

0

16346

October 16th, 2008 13:00

What's the best way to updgrade a hard drive on a 1330M XPS laptop?

Does anyone have any experience upgrading a drive?  I want to change from my 120g 5400rpm to a 250g 7200rpm Seagate.

 

Two options: keep everything that is currently installed intact, or start fresh.  Obviously, starting fresh would likely be the easiest, or would it?  Would I keep all the Dell Direct stuff with a clean install?

 

What's the best way to upgrade without doing a clean install - aka keeping all my apps and data.

 

thanks

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    664

    0

    Posted October 16th, 2008 13:00

    Selectrive cloning will work best - you can use Acronis True Image or Symantec Ghost (but the free SeaTools won't do this job).


    BEFORE you start the job, be sure you have the Media Direct CD - you CANNOT clone this partition.  Nor can you clone the master boot record.

     

    See below for details.

     

    http://www.goodells.net/dellrestore/mediadirect.htm

  • otterbay

    108 Posts

    664

    0

    Posted October 16th, 2008 14:00

    So I need additional software.  But how is the physical hookup done, through a USB port?
  • kirkd

    6 Operator

    •

    5241 Posts

    664

    0

    Posted October 16th, 2008 20:00

    Media Center version 3 can indeed be cloned using Acronis. Earlier versions used a protected partition schems which could not be cloned, but version 3 can.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    664

    0

    Posted October 16th, 2008 23:00

    Yes, you'll need a 2.5" SATA hard drive case to hold one of the drives while cloning it.  The advantage is that you can mount the drive being replaced in it for backup purposes after your upgrade.

     

  • otterbay

    108 Posts

    664

    0

    Posted October 17th, 2008 05:00

    MEdia Center?  I thought that was part of Vista's structure...really - it didn't use to clone?
  • otterbay

    108 Posts

    664

    0

    Posted October 17th, 2008 15:00

    Below, someone mentioned Media Center 3.  Do you think they mean Media Direct 3?

    I just bought this laptop in February, so I imagine I have the latest version of MD.

     

    You noted that cloning and Media Direct cause problems (I read the link you supplied).

     

    Is there a way that you have used to clone the drive AND get Media Direct to be functional?

  • otterbay

    108 Posts

    664

    0

    Posted October 17th, 2008 15:00

    Do you mean Media Direct 3?  If so, do you have any advice on the cloning process?

     

    thanks 

  • kirkd

    6 Operator

    •

    5241 Posts

    664

    0

    Posted October 17th, 2008 22:00

    Sorry, meant Media Direct.

     

    To clone, you need a program such as Acronis and a USB drive enclosure to hold the new SATA drive. These cost about $35. You then use the program to clone the original drive to the new one. When done, you replace the old drive with the new one and it's done.