LuigiG

updated

10 years ago

L

LuigiG

1 Rookie

•

4 Posts

0

2447

July 18th, 2016 12:00

Unable to boot. No safemode option. Dual gpu and video driver.

After some windows update the dedicated graphic card stopped working properly (AMD Radeon HD 7730M).Some time after that it got worse and stopped working, giving an infinite bluescreen-crash boot loop.

Restoring factory settings didn't help. Booting in safe mode, and then disabling the dedicated graphic card drivers/device worked.

Now there was an important windows update that had some gpu drivers updated (shouldn't have enabled automatic windows updates installation), and it broke again. Bluescreens and/or blackscreen are the result. Problem now is that I'm unable to boot the laptop in safemode. I can however boot with live usb/cd.

I'm pretty sure the problem is the same and disabling the second gpu and drivers is going to solve it, so any advice about how enable safe mode from the registry or any other way will be appreciated. So far smashing the f8 / shift+f8 key doesn't seem to work in windows 8.1, and it doesn't seem to load by itself.

Other info: Windows 8 (from factory), Intel4000 as main gpu, HD 7730M as secondary.

  • LuigiG

    1 Rookie

    •

    4 Posts

    1640

    0

    Posted July 21st, 2016 23:00

    Finally solved by myself.

    It all came from a windows update which updated the catalyst control center (since my secondary gpu doesn't work, it broke everything). Bluescreen was atikmpag.sys one. Booted from live cd, deleted atikmapg.sys and atikmdag.sys (because why not), and reboot.

    Since the windows update seem to keep trying to install itself, deleted downloaded updates and all amd related things I could find. Installed intel 4k drivers, disabled the secondary gpu and called it a day.

  • aklee

    35 Posts

    1640

    0

    Posted July 21st, 2016 02:00

    Run diagnostics first:

    1. Power on
    2. F12
    3. Select diagnostics
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    1640

    0

    Posted July 21st, 2016 04:00

    When the system hangs on powerup, hold the power button for 30 sec until it shuts down.  Then restart - the next startup should sense the failed boot and trip you into Safe Mode/Recovery Mode.

  • LuigiG

    1 Rookie

    •

    4 Posts

    1640

    0

    Posted July 21st, 2016 09:00

    Button held for 30 seconds down (Should the long time make it different?), no differentes results, auto-safe mode boot doesn't seem to work by itself even beign shut down and letting it shut itself down multiple times.

    Thanks for the repplies, but still stuck. That's why I was asking about modifying the registry or removing drivers/devices from a live usb/cd, looks like there isn't another option.

  • LuigiG

    1 Rookie

    •

    4 Posts

    1640

    0

    Posted July 21st, 2016 09:00

     Diagnosics passed. No problems found. I don't think the diagnosics look at the secondary graphic card which is the one causing problems.

    Also, I'm able to boot from live usb/cds without problem, and the screen works fine then.