UNSOLVED

mstavros

updated

22 years ago

Closed

M

mstavros

1 Rookie

•

1 Message

0

2244

July 26th, 2004 14:00

Smartstep 250 Overheat

I will to add to this list mine as well.  I thought it was because I was working the CPU too hard, but just recently my SS250 has also been shutting itself after about half hour use.  If anyone is considering a Class Action Law Suit, please include me.

Dear Dell,

I sure hope someone there (in the US, not Bangladore) realizes that they have a LOT of unsatisfied customers and that many of us, work in IT fields who recommend or buy systems.  If Dell were my company, I would take care of customer complaints when they deal with poor system design.  In today's environment, another system is just a click or short drive away.

M.Stavros

 

  • ih8smartstep

    1 Rookie

    •

    7 Posts

    170

    0

    Posted July 28th, 2004 17:00

    well first off it seems as though dell doesnt care that they built a defective system. so i think we should get our money back, ive wasted almost 2000$ on this dumbstep and a lot of time and they really need to take care of it. but a lawsuits is a good idea.    just a note the dell forum wouldnt let me post this at first because of the word l@awsuit lol i guess they dont want us to say that.
  • pagnmickie

    1 Message

    170

    0

    Posted July 29th, 2004 19:00

    I've had my system for a year and a half.  It's doing the same thing.  A year ago I sent it in and they replaced the mother board, cpu and fan.  Of course now it's no longer under warranty and it's doing the same thing again.  This is a bad design and I feel cheated.  I'm disappointed as everyone always told me that Dell was easy to work with and their support was so good.  Apparently not when it's a defective machine.

    Mickie

  • 170

    0

    Posted August 10th, 2004 01:00

  • cykaaro

    36 Posts

    170

    0

    Posted August 11th, 2004 14:00

    I've not had any shutdown/overheating problems per say, but was getting it to run far to hot for a while. This is how I fixed it.

    FIrstly take canned air to the right intake grill and blow out a much dust as you can. That in itself will help somewhat. I was opening the laptop up myself anyways to fix my loose screen problem I've always had [seems the metal supports have been broken since day 1, and the screws had to be tightend, which was causing my screen to wobble instead of be tight] So while I had it opened [documents on how to are on the dell site to download] I took off the heatsink/fan unit which is kind of like a duct with the fan in it to cool the cpu. I took it off, and was rather disappointed at the thin aluminum/thermal grease they used to put the heatsink on the CPU. I took the top part off the heatsink/fan ductwork, and with a q-tip and alcohol cleaned thoroughly as well as cleaned all the original thermal grease form the top of the CPU and the heatsink. I then used Artic Silver II thermal grease, thinly put on the cpu, [I use it on all my system builds I do] and carefully put back on the heatsink/fan unit as the documents instruct. I've since run a lot cooler and haven't had any high temp issues since.

     

    As with a desktop system, dust does collect and found this was the culprit mainly, but didn't like what I felt was inferior thermal paste to using something such as Artic Silver. I do highly recommend though taking canned air and blowing out the fan/airduct unit though to minimize dust buildup. Remember that the 250N will run fairly hot to begin with as it is a full blown P4. I've though about changing it to a mobile cpu, but don't know if it's possible or not as I've not researched into it as of yet.