UNSOLVED

commodon

updated

18 years ago

Closed

C

commodon

1 Rookie

•

104 Posts

•

2 Points

0

4057

February 8th, 2009 07:00

Replacing the original 100GB 7200RPM HDD in the E1505

After two years of heavy use, I've pretty much run out of free drive space on my E1505 with its 100GB 7200RPM HDD.  Combined with the desire to re-install the Windows Vista 32bit operating system, I decided to replace the hdd with something larger, but of the same speed, etc.

After a bit of searching, I discovered a 320GB 7200 RPM FUJITSU SATA NOTEBOOK HARD DISK DRIVE (Model MH-2320BJ-R) was perfect!  It has a 16MB buffer (the original has 8MB) and was installed without a single problem.

In closing, if anyone is looking to replace their existing HDD with something larger and better, go with the above!

  • 328

    0

    Posted March 2nd, 2009 19:00

    Commodon:  what BIOS are you running?  Do you know the maximum HD you can install in an  E1505.  Dell "Technical Support" indicated 120 GIG.  But you have a 320 IG installed.  Any issues?

     

    Thanks.

     

    ColumbusDogMan

     

     

  • davejohn

    2 Intern

    •

    2484 Posts

    328

    0

    Posted March 8th, 2009 19:00

    I upgraded my E1505's original 80GB 5400 RPM drive with the Fujitsu 320GB (it was on sale at Newegg) with no problems.  The BIOS (A17) saw it right away and I restored the Vista image I had made of my previous drive.  Vista was working fine and I didn't want to reinstall all my apps, so I went the imaging route.  I had to use Vista to expand the 80GB partiton to the full 320GB after restoring, but the BIOS has no trouble seeing the whole drive.