UNSOLVED

kll56

updated

17 years ago

K

kll56

19 Posts

0

3615

September 5th, 2009 18:00

Latitude C610 display problem

I got an older c610 from a friend that wasn't working. I re-installed windows xp pro and it works well. The only problem is when the laptop comes out of standby, there are flickering lines around the right side of the monitor and the screen is flickering although it is viewable. The only way to correct this is to restart the system. It then works fine until I place it in standby or the system goes into standby when I leave it for a while. I got all the drivers from dell and I have re-installed the driver to try to correct the problem, but it didn't help. There's only one driver available from dell, so I don't have a lot of choices to begin with, if the driver is the problem. Any ideas or suggestions would be appreciated.  Thanks   Keith

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    183

    0

    Posted September 5th, 2009 19:00

    Does the same fault show on an external monitor?