
UNSOLVED
Closed
Just replaced motherboard on i8600, but monitor wont start up.... help
I just replaced the motherboard on my i8600, i replaced it with a new one off ebay. the computer boots up and everything runs, however, the monitor dosnt turn on, it stays black. its the same exact motherboard, the only thing i see different is where it says the "ddq12 LA-1901 REV: 2.0(A01) MADE IN TAIWAN 2003-8-21 (ALL OF THAT IS THE SAME on both of the system boards) then it has the white boxes with 1-4 on the replacement, one it has marks through 1-4. On the board it REPLACED, its only marks through 3 and 4. Other then that everything about the motherboard is the exact same..... Any help is greatly appreciated, i'm running outta options. Thanks. Everything is plugged in correctly....
Responses (9)
Solutions (0)
IllegalOperatio
21 Posts
293
0
Posted July 14th, 2004 18:00
If I were you I would reseat the card and ram and try this again. I have had to do this several times before.IllegalOperatio
21 Posts
293
0
Posted July 14th, 2004 20:00
DId it exhibit this problem before you replaced the mainboard? Have you checked any wires from the card to the actual LCD screen?
I would not run out and buy a new card just yet, was that mainboard tested and guarenteed?
- i literally can log into the computer, and hear the windows start up song and put in my password, but the monitor still is blank. should i try to buy a different graphic card or what? do u think the ati mobility 32mb would work on it instead of this one? please help
IllegalOperatio
21 Posts
293
0
Posted July 14th, 2004 23:00
Is this the reason why you replaced the mainboard?- no, the other motherboard was fried by a ferret and a can of coke. i got it looked at and they said the mobo was bad, but never mentioned the video card, probably because they couldnt tell.. anyone know where i can get the part? i would prefer a 32mb card, since it is cheaper..

02pontiac
11 Posts
293
0
Posted July 14th, 2004 03:00