
Solved!
Go to SolutionInspiron N7110 "0% available (plugged in, not charging)"
I just bought this Saturday the 4th, 2012 and the above subject line has been there since I plugged it in. I have searched the web and tried everything listed everywhere and none have fixed this problem. I read that I may have recieved the wrong power supply and it isn't providing enough power. I can't flash the bios as when I tried with a downloaded program from Dell, it tells me I have to have at least 10% battery power. I have searched this computer inside and out and all I can get it to show me is that the battery is good and 100%, even though I haven't and can't charge it since the stupid computer manufacturer has to have a chip in the power supply. I could switch it with my old HP Vista laptop to see if it would charge with that one, but that chip will prevent it. I was able to fully charge the HP battery with the Dell charger/power supply. If anyone knows a fix for this model of laptop, please post it here for me.
Also, does anyone have their toll free USA number just in case I can't get it fixed? I even bought a 2 year extended warranty also.
Thanks for any and all help on this. ( knew I should have stayed with HP.
Responses (21)
Solutions (0)
DELL-Royan S
6 Operator
•
3802 Posts
4131
0
Posted August 7th, 2012 21:00
Hi,
Welcome to the Community. Press the F2 key at the Dell Logo to enter the Bios, and check if the AC adapter is getting detected. If it says Unknown you will need a replacement adapter.
Send me a Private Message, click on my user name, add me as a friend, and send me your Service Tag, Phone number and Address.
Thank you.
DELL-Royan S
6 Operator
•
3802 Posts
4188
0
Posted August 8th, 2012 00:00
Hi,
Turn off computer, and as soon as you turn it on keep tapping on the F2 to get into the Bios.
Thank you.
Rashid Osmanov
4 Posts
4188
0
Posted August 26th, 2012 05:00
I have two new Dell N7110 with i7 and not functional batteries. When i changed power adapter and battery from one to another battery started charging but always showing 0%. I asume that this is manifacturer bug.

DELL-Royan S
6 Operator
•
3802 Posts
4188
1
Posted August 13th, 2012 04:00
Hi,
I have responded to you in a Private Message, please respond back accordingly.
Thank you