
UNSOLVED
Closed
Inspiron 5150 Laptop Battery not charging
About 6 months ago I received an unsolicited replacement of my AC adapter from Dell. I sent my old one back in the box supplied. Once I began using this adapter I found that my battery would often have little or no battery life even though the laptop had been connected to AC for an extended time on prior use. I checked the battery charging indicator the next time that I used it on AC and found that the laptop was not charging. I tried a number of things to see if it would indicate charging and when I twisted and pushed the round plug into the back of the laptop battery I could get it to indicate charging but the slightest movement would stop the charging. I called support and they reaplaced the charger again but it is still the same. I did not have a problem with the original charger but I assume that there was some kind of recall when I received the first replacement. Now, I have many circumstances where I connect my laptop to charge the night before I wil be traveling and need to use it without AC only to find that I have no charge when I turn it on when I need to use it in a work situation. The only way I can be assured that it is charging is by turning it on and jiggling the round plug until the power applet shows charging and leaving the system on without touching it until it has fully charged.What can I do?
Responses (4)
Solutions (0)
After buying a new battery, I had intermittent trouble charging it. After two solid days of not charging, and Dell support saying I to pay $59 for diagnostics, I found this procedure.
1. Click Start and type device in the search field, then select Device Manager.
2. Expand the Batteries category.
3. Under the Batteries category, right-click the Microsoft ACPI Compliant Control Method Battery listing, and select Uninstall . WARNING: Do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver.
4. On the Device Manager taskbar, click Scan for hardware changes . Alternately, select Action > Scan for hardware changes.
Windows will scan your computer for hardware that doesn't have drivers installed, and will install the drivers needed to manage your battery's power. The notebook should now indicate that the battery is charging.It worked. Many discussion forums relate this to Windows VISTA, but I have XP. Be sure you uninstall only Microsoft ACPI Compliant Control Method Battery, not any other ACPI devices.

ejn63
11 Legend
•
87469 Posts
•
321256 Points
445
0
Posted March 8th, 2008 14:00
If you let it go, the board will eventually arc and destroy the charge circuit, necessitating a $400+ board replacement.