UNSOLVED

dwon63

updated

22 years ago

Closed

D

dwon63

10 Posts

0

10267

April 1st, 2005 03:00

Inspiron 1100 fooling fan replacement

Hi everyone.  I just switched out my Celeron processor to a Pentium 4 and I'm now thinking about replacing the cooling fan with something stronger.  Is it possible and if it is, what model fans are compatible with my computer?  I already have one of those cooling fans that you place under the notebook and all but sometimes I forget to turn it on. 
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    187

    0

    Posted April 1st, 2005 09:00

    The fan has to fit the chassis and have the right connector/sensor. Safest is to buy from Dell.
  • dima333a

    14 Posts

    187

    0

    Posted April 1st, 2005 13:00

    Well, You actually did not state what is the speed of your new Pentium 4...
     
    But, from my own experience, you do not need to change anything.
     
    I upgraded my Inspiron 1100 from Celeron 2.3Ghz to Pentium 4 2.6Ghz and I used Arctic Silver as an interface. Now my laptop is running no hotter than before, and it is not very subjective, since I actually went to Intel web site and looked at the specifications. Inspiron 1100 can accept CPU with FSB 100 (400) Mhz only. The Celeron that came with my laptop was SL6WC (unfortunately Intel removed the data about that particular model, but left a similar model SL6WD )
     
     and I changed to the model SL6PP
     
     
    The termal guidlines for the particula models were very similar 58 Watt for Celeron against 62 Watt for Pentium. More over, I looked through all the possible CPUs and figured out that the hottest CPU that fit Inspiron 1100 is Pentium 4 2.8 Ghz SL7EY
     
     
    Which has thermal guidline 68.4 Watt (it is less than 18% above the Celeron that came with my system), the second hottest CPU that fits Inspiron 1100 is the Pentium 4 SL6PP that I installed and it is about 7% hotter than the the Celeron that came with my system.
     
    If you installed less speedy Pentium 4 ( less than 2.6Ghz ) I would not worry about the cooling assembly. Change the default thermal interface to something like Arctic Silver  and enjoy you laptop.
  • dwon63

    10 Posts

    187

    0

    Posted April 1st, 2005 14:00

    Alright I think I'll do that. Thanks