UNSOLVED

spoon_burner

updated

22 years ago

Closed

0

9001

December 23rd, 2004 03:00

Help. Inspiron 5100 Slot A for the Ram doesnt work.

I found out that my Slot A for the RAM doesnt work. I know its not the RAM because I check 2 of them works at Slot B. Any Ideas to do something with it? Clean it or something? PLEASE HELP ME I DONT WANNA BUY ANOTHER MOTHERBOARD FOR $490 bucks. HELP ME!!

Message Edited by spoon_burner on 12-23-2004 12:00 AM

  • NemesisDB

    2 Intern

    •

    7944 Posts

    143

    0

    Posted December 23rd, 2004 03:00

    I assume you're not under warranty, if you are, SEND IT IN ... that said:
     
    1) consider buying a single stick of 512mb and just using it in slot B -- I bought my last one for $89.  this is easy and it should be sufficient for most uses.  you will need to flash the bios to A31 or higher if you want to use a single stick of pc2700 ram by itself.  pc2100 ram will work under any bios revision.
     
    2) using a stick of ram you don't care about you can try inserting and removing it in slot A in an attempt to clean the contacts -- which assumes that's the problem with the slot of course
  • 143

    0

    Posted December 23rd, 2004 04:00

    Is it possible to repair it?

    Message Edited by spoon_burner on 12-23-2004 12:02 AM

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    143

    0

    Posted December 23rd, 2004 13:00

    No. The system board nees to be replaced if the DIMM slot is faulty.