
UNSOLVED
Closed
DVD widescreen on 8500
Hi, I just recieved my inspiron 8500, and popped in some DVD's. They worked fine, but there was still the black horizontal bars on the screen. How do I watch a dvd so it takes up the entire screen so I can utilize the full power of the 8500s widescreen.
Responses (14)
Solutions (0)
- You should also consider that how the DVD fills the screen depends on the DVD itself. Some DVDs are extra-wide, or cinemascope, with an aspect ratio of 2.35:1. Even on 16x9 displays these movies still have a very small amount of black space on the top and bottom.
Also, some older DVD releases are non-anamorphic, meaning the video signal encoded on the disc is actually 4:3 with the black bars burned into the video itself. These older DVDs don't size properly on widescreen displays, although there is probably a way to fix that using a software DVD player.
Regardless of the situation, 16x10 is definitely better than a standard 4:3 display for watching DVDs, especially if the DVD is anamorphic. You'll get better resolution on those using a widescreen display. - okay...i think i have the same problem too...Since the aspect ratio of the 8500 is 16:10...when viewing movies encoded in 16:9 format, shouldn't the black bars above and below the video be way smaller as opposed to watching on a screen with 4:3 aspect ratio? When I watch DVDs, i know there are those that are encoded in such a way the bars exist, but what about those new ones where it is recorded in wide aspect format? Does anyone know a work around this, make windvd, the included dvd player utilize as much of the screen as it can? Any help is appreciated...Thanks!
Yeah i would love a little function so that you could stretch the screen or zoom, like you can do with a 16:9 TV when watching other screen formats.
I noticed the problem is less when looking on dvd, but when playing a DiVX movie then its worse, more black bars up and down =(
then a option to stretch out would be cool =) hope anyone has a little trick to make this possible.
/Dexter
- Most movies are encoded in the 1:85:2 or 2:35:1 wide-cinema scope format which is the VERSION the directors intended for the viewers to experience. You CAN use pan & scan to shear off the parts of the movie in order to "fill" the whole screen however that would be like cutting off the front and back halves of your favourite book in order to "fit" it on a bookshelf. Compare the results here: http://www.widescreen.org/examples/lord_rings_fellowship/index.shtml.
Sorry for the conceived haughtiness in the manner which I responded to your post but being the film aficionado that I am, it vexes me greatly when people merely "wish" to fill their screen by sheering off portions of the film.
Hey yeah thx for your replyes =)
But dont think you understand what i ment, that alternative you showed me now is a zoom option that the TV uses
and that was a excellent example how bad it could be, but first i want a function that stretch out the picture,
wich will make you keep all of the picture, dont know if you tried the xbox media player, then you can do just this ( stretch out the screen to fit all )
this functioni want to be able to use directly on my computer not on the tv, and it would be cool.
Cheers !
Robert
Thanks for the pictures for comparison...I love watching movies, that's why I splurged on the 8500...I know to some the amount isn't much, but I'm still a student and it was a rather sharp pinch of the wallet to buy the 8500. I wouldn't watch a movie in any other way than the director intended it to be watched. So give me the black bars, I don't mind them, so long as that's the Director's view...However, what I don't understand is why the black bars are so big even though the 8500's aspect ratio is similar to some of aspect ratios that movies are encoded in...Sure, LOTR might still give me black bars albeit it being an extra wide aspect ratio, but what about those movies which is just about the aspect ratio of the 8500? Shouldn't the bars be small? I don't want to just fill the screen up, but rather, see it utilized fully...some movies (at least to me) seem to be played in the 4:3 ratio even though it is encoded in 16:9 and when played on the 8500, it seems that it is played in the 4:3 format and stretched to the sides so that it fits the 8500's screen width...I'm not sure if you can get what i mean, since I don't think I sound coherent...I'm just not sure how to place it...But thanks all the same.
Howdy
I have a Latitude D800 with WUXGA 1920x1200. I've upgraded to Power DVD XP Deluxe 5.0, which has a function called CLEV that I'm quite impressed with so far. In fact I just received a Highlander TV series II on DVD which is supposed to be a 4:3 affair. Now CLEV lets you strecth it to the full screen, and I'm amazed to see that the aspect ratio seems to be fine. You can do similar things with widescreen movies--quite flexibly in fact--there are three modes of CLEV in all.
Not a plug--just a satisfied customer
Cheers--Alex
Hey Foxysport !!!
Yeahhh !!! i love you hehe i really mean it, tried now with Power DVD 5 and it worked, with no settings it was full screen
And it looks awsome !! case is solved mate ! i will try with a DVD movie also, but it worked great with a DiVX movie, and the best
thing it doesn't look weird !!!
Have a nice day all ! im out of here !
Cheers !
Robert

Sting7k
62 Posts
453
0
Posted August 12th, 2003 20:00