UNSOLVED

wags317

updated

22 years ago

Closed

W

wags317

15 Posts

0

5352

March 20th, 2005 04:00

DELL 600M and Lexar 128MB Jump Drive

I am having is randomly when I will insert the usb jump drive in to either usb port nothing will happen, however, if I remove it and reinsert it work (also after it works  the first time it will contiune work when I unplug it and repluge it in) then a few hours later it will repeat the same problem. I have never had this happend with a usb devices before.. so far everything else works fine on my notebook except this thumb drive, Same goes for the thumb drive, it work just fine on the first insert everywhere else except my 600M.. I have tried everything from installed system drivers to reinstalling usb driver to change the power managment option on the usb port host controllers not works.. does anybody have a suggestion or could this be some sort of incompatiablity issue?
  • RRF985

    563 Posts

    136

    0

    Posted March 20th, 2005 17:00

    My Lexar jump drive does the same thing on my desktop.  Works fine everytime I plug it in on my 600m but when I plug in on my desktop it takes a couple tries for it to see that it's there.  I don't get it.
  • wags317

    15 Posts

    136

    0

    Posted March 20th, 2005 19:00

    yeah, this is a weird problem considering it works fine on your 600M and take a couple of tires on mine.. their must be some compatiable issue with lexar with the type of USB controler they use or something because I can't explain it.
  • pukame2

    224 Posts

    136

    0

    Posted March 21st, 2005 06:00

    The Lexar brand of memory sticks and flash readers sometimes have compatibility problems.  This varies from our laptop and desktop on several occasions. We have had several replaced and exchanged in the past. Today, occasionally the memory sticks are not recognized by our computer readers. We have to remove, reboot and reseat until it works. We find other brands to be more reliable. MP.