UNSOLVED

MOY

updated

20 years ago

Closed

M

MOY

4 Posts

0

6798

October 30th, 2006 01:00

D800 - BIOS flash failed - now nothing

Hi, I tried a windows BIOS flash but did not complete (seemed to be in a loop). Computer ran fine for several hours after, but on first restart after the failed flash - nothing!

Dell say I may have damaged my motherboard (ouch). Does the fact that the computer worked well after the flash attempt give me any hope of rebotting the system without replacing the motherboard?
 
If so, can a bootable cd (D drive) be used? I have drive A module for my Latitude, but no other computers with A drives to make a diskette. I could try harder to find a computer with an A drive if that helps.
  • chapmasj

    306 Posts

    406

    0

    Posted October 30th, 2006 18:00

    If you didn't even get the BIOS flash screen on power up, the answer is no. If you can get into the BIOS check the boot order is as it should be. The Windows HDD method of BIOS update does not have a good reputation on these boards. The floppy disk drive method seems to be more reliable, sorry.
  • MOY

    4 Posts

    406

    0

    Posted October 30th, 2006 20:00

    Thanks for your advice. I don't think I get the BIOS flash screen - is that the same as the BIOS screen (press F1 on power up). All I get the power button light coming on, about 1 second of hard drive noise followed by about 2 seconds of cd rom drive noise, and then nothing more.
  • leduke30

    2 Intern

    •

    4033 Posts

    406

    0

    Posted October 31st, 2006 05:00

    Those are both symptoms of a "fried " BIOS Chip. Mother board replacement is your only shot