UNSOLVED

Yoniplt

updated

14 years ago

Y

Yoniplt

3 Posts

0

15415

June 3rd, 2012 14:00

Can't extend Display with XPSL501X to Dell UltraSharp 2407FP Display

I've got a new XPS 15 L501X, with the NVidia GT 420M , when I tried to connect it to Dell 2407FP Display through a HDMI to DVI cable I got no response, the laptop doesn't recognizes the display, so the display goes straight to auto-save mode.
I did succeed once to extend the screen to the display but never got to reproduce it, even with 2 different cables (both were tested in other laptops and worked).

Any ideas?

I know there's some issue with Optimus on this type of laptops is there a way to switch the output to the  NVidia GT 420M?

  • DELL-Nikhil M1

    1 Rookie

    •

    95 Posts

    702

    0

    Posted June 4th, 2012 15:00

    Hi Yoniplt

    Welcome to the community ,

    I’m sure you would be able to extend the display on the monitor but you may not be able to clone or duplicate the display on this card and its because of the Nvidia Optimus technology.  So please get a mini adpater cable to HDMI or mini adapter to DVI using the mini display port on the laptop to get a duplicate display accordingly but if you are looking to only extend the display and still not able to do that then you might want to update your Graphic card drivers for the laptop from the website below

    http://dell.to/K8uAD5

    Please revert back for any questions.

  • Yoniplt

    3 Posts

    702

    0

    Posted June 5th, 2012 07:00

    I tried updating my Graphic card drivers (both the Nvidia and the Intel one) but unfortunately I'm still unable to extend the screen to the monitor.

    The Laptop doesn't even recognize the monitor.

  • DELL-Nikhil M1

    1 Rookie

    •

    95 Posts

    702

    0

    Posted June 5th, 2012 15:00

    1)      Does the monitor gets recognized in the Nvidia Control Panel, try checking that by right clicking on desktop and then selecting Nvidia Control Panel. There if you happen to see both monitors then you are good but if you just in case see a third monitor which say analog then just disable it and then see if that works.

     

    2)      If you happen to see only one monitor on the control panel then you might want to uninstall all the video drivers and reinstalling them rather than just updating it .

     

    3)      First install the Intel Graphics and then install the Nvidia and then check the extended display, make sure you restart the computer after every uninstallation and installation. 

    4)      You may try using the adapter from mini display port to DVI cable. Now this is controlled by Intel Graphics and not the Nvidia Control Panel.

     

    Note: Always try switching the displays using the Nvidia/Intel Control panel itself and not the fn+f1 or Windows+P  key combinations.

     

    Thanks,

    Nikhil

  • Yoniplt

    3 Posts

    702

    0

    Posted June 8th, 2012 16:00

    The monitor doesn't get recognized by the Nvidia Control Panel, I see only one monitor there.

    I tried reinstalling the drivers at the order you've suggested and still got no result.

    haven't tried connecting it with a mini display to DVI cable cause I haven't got one

    is there some other solution?

  • DELL-Nikhil M1

    1 Rookie

    •

    95 Posts

    702

    0

    Posted June 28th, 2012 15:00

    I'd suggest you try to purchase an adapter to see if it works for mini display to DVI. If that doesnt work then I suppose it could be a problem with the motherboard. Apologies for the late reply.