UNSOLVED

Andy730

updated

14 years ago

A

Andy730

12 Posts

0

19189

August 20th, 2012 10:00

4GB of RAM installed, but only 2GB reported in BIOS??

Hi, I have a Studio 1737 and it came with 4GB of ram and Vista installed. Over time i upgraded to Win7 and then a SSD and all was well. But i noticed today that windows reported only 2GB of ram, so i rebooted and checked in BIOS, and it also says 2GB. It doesn't seem to matter what module is installed in what slot, but i always only get 2GB (even though there is 4) I've updated the BIOS this afternoon, but it's still the same.. What can i check next because i'm stuck now... Cheers Andy
  • dgkpcon

    3597 Posts

    555

    1

    Posted August 20th, 2012 10:00

    1)Remove and reseat the ram in EACH slot.

    2)Run dell diagnostics on system memory,run extended test,which you can select after the first set of tests run.

    3)If any errors are reported you could have a bad stick of RAM.

    4)Are you ABSOLUTELY SURE there are in fact,2 sticks of RAM installed??And are they 2 x 2GB sticks or,2 x 1GB sticks??

  • Andy730

    12 Posts

    555

    0

    Posted August 20th, 2012 16:00

    Thanks for taking the time to answer... I shall reply to each point likewise:

    1. Yes, done that, and re-booted numerous times. Thus i have found that no matter where a single 2GB module is placed (slot one or slot 2) the BIOS reports it as 2GB, if i repeat the test with the other module, again the BIOS reports it as 2GB, if i then re-fit the first module along with the second, the BIOS still reports it as 2GB...

    2. I did that over the weekend, but i shall do it again just to be sure..

    3. Nothing was reported, but as in 2, i shall try again.

    4. Answer 1 sort of answers that...

    It's all quite bizarre..