
UNSOLVED
MG
Mike Graben
28 Posts
0
2320
July 7th, 2010 00:00
XPS/Dimension 200/5150C Flashing Lights - Combo not in manual
Hi there,
My parents have a XPS/Dimension 200/5150C machine that won't boot up. Sometimes it doesn't even reach the Dell BIOS screen. I'm aware this is likely a hardware issue, but the sequence of flashing lights on the front of the machine, 1-3-4, is not in the manual.
I'm guessing it's a RAM issue of some sort, but hoping someone might be able to clarify what the sequence means before I dig into the machine further.
Thanks!
Mike
Responses (3)
Solutions (0)
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
391
0
Posted July 7th, 2010 09:00
Mike,
1-3-4 = System activity preceding video initialization
Not much help I agree. Stick with osprey4 troubleshooting memory.
DELL-Chris M (old account)
#IWork4Dell
Mike Graben
28 Posts
391
0
Posted July 7th, 2010 11:00
Hey guys,
Thanks for the replies. I know the machine is configured with just two memory modules. At this point, I assume that all I can do is replace them and hope that's the issue? I'm trying to avoid having to take it to a repair shop and such if I can do this on my own. If the lights meant something other than a RAM/card issue, I'd certainly reconsider :)
-Mike

osprey4
6 Operator
•
34230 Posts
391
0
Posted July 7th, 2010 09:00
Hi Mike,
You're on the right track. This system requires paired memory modules, so if there are four, I would try taking out two at a time. The remaining two should be in slots 1 and 2. If you have only two modules, the best plan would be to bring it into a local shop for diagnosis.
This system takes DDR2 PC2-5300, up to 2GB per slot (although you'd need a 64-bit OS to use more than 3.5GB).