essjaygee

updated

16 years ago

E

essjaygee

6 Posts

0

180906

January 20th, 2011 13:00

XPS 8300, SATA port question

The tech specs indicate new xps 8300 motherboard has 2 x SATA 2 ports and 2 x SATA 3 ports. The service manual has no indication of which ports are which. It just shows SATA ports numbered 0 thru 3. Does anyone know which are the desinated SATA 3 (6Gb/s link speeds). Thanks.

  • c99dell

    2 Posts

    4824

    1

    Posted February 1st, 2011 06:00

    I plugged a SATA3 6GB/s Crucial C300 SSD into port 0, and it is recognized as SATA3 in CrystalDiskInfo program. From this I would guess that port 0 and 1 are SATA3, and port 2 and 3 are SATA2.

  • Mike222444

    1 Message

    4821

    0

    Posted January 29th, 2011 00:00

    I have the same question, I am about to put in an extra HDD. There seems to be different SATA cables for SATA 300 vs SATA 600.

  • mre0

    3 Posts

    4821

    0

    Posted January 31st, 2011 11:00

    bump

     

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    4821

    0

    Posted January 31st, 2011 12:00

    I just asked a Dell Forum Liason to look at this thread.

    He may be able to post the info you want.

    Ron

  • mre0

    3 Posts

    4821

    0

    Posted January 31st, 2011 13:00

    Thanks for the assistance Ron.

    The Information would be very useful, because the Sandy Bridge Chipset Problem only occurs to the SATA-II ports.

  • essjaygee

    6 Posts

    4821

    0

    Posted January 31st, 2011 15:00

    In the picture I don't see SATA 2 or SATA 3 designations .... just plug identifiers ... ie sata0, sata1, sata2, and sata3

  • essjaygee

    6 Posts

    4824

    0

    Posted February 1st, 2011 06:00

    Thanks for the information. I believe my system shipped with the harddrive on port 0 and the dvd drive on port1. I added a second harddrive (SATA3, I think.. WD caviar black 1TB) on port2.  I'll download CrystalDiskInfo and see what it tells me.

    This info is good to know since the intel sandy bridge chipset problem just is on SATA2 ports.....

    http://techreport.com/discussions.x/20326

  • 4824

    0

    Posted February 1st, 2011 12:00

    Would be intrested too as the service manual does not say which port is SATAII and which is SATAIII. Bought an additional SSD to the included 1.5 TB disk as my OS drive ... it's a SATAII drive so I think it doesn't matter in general, but because of the Sandy Bridge bug I'd like to connect my OS HD to a SATA III port until Dell exchanges our Mainboards.

  • Hooterville

    12 Posts

    1700

    0

    Posted February 1st, 2011 18:00

    How in the world is Dell going to exchange out motherboards?

    Just purchased this computer and maybe I better return it until they fix this problem.

     

  • Hooterville

    12 Posts

    4824

    0

    Posted February 1st, 2011 18:00

    So are we going to have problems with our new Dell XPS 8300 computers with this Sandy Bridge board?