UNSOLVED

johnb111

updated

19 years ago

J

johnb111

30 Posts

0

24515

January 2nd, 2008 23:00

XPS 420 problems

 
I got my system from the factory 6 days ago with a bad memory stick.  After many, many hours of troubleshooting with both Dell and microsoft we finally determined it was bad memory.  Kudos to Dell for sending a replacement overnight, but then when it came it is a different branded stick than what i have.  so i now have 3 different brands of ram in my system (it came factory installed with 2 brands -- nanya and samsung).  So here are my questions:
 
1.  I've always heard that you should have the same brand memory in ALL your slots.  What's the consensus on this?
 
2.  I had an issue with the mouse pointer which turned out to be the video driver.  After loading the latest video driver(2600xt) provided from dell tech, I can not enter the catalyst control center.  When I click on it the mouse will turn to a circle for a couple seconds and then turn back but catalyst will never load no matter how many times i click on it.  I've rebooted several times.  Ideas?
 
3.  When I apply power (i.e. turn on the power strip but NOT turn on the actual computer) to the system, everything will light up for about a second like it's going to boot up but then will go out.  I would expect that simply turning on the powerstrip would result in nothing.  Is everyone's 420 like this or do i have a defective power supply?
 
I have vista premium 32bit, 3gb 6400 ram, 320 gb drive, q6600, ati 2600xt.
 
Help!  
Thanks in advance.
  • Skuggi

    37 Posts

    244

    0

    Posted January 2nd, 2008 23:00

    as to #1  You do want exact matching pairs for the ram to run in Dual Channel Mode.
     
    as to #2 Got me on that one lol
     
    as to #3 That's the Power Supply filling the capacitors from the sudden jolt of power not the best thing for the system to flip a power strips button a lot, i'd just leave it on the surge protector works when it's on or off.
  • packerFan07

    705 Posts

    244

    0

    Posted January 2nd, 2008 23:00

    1.  I've always heard that you should have the same brand memory in ALL your slots.  What's the consensus on this? I believe matched pairs are suggested, but I rarely have had all sticks match by brand. You do want matching speed in the pairs. Memory will take on the characteristics of the slowest RAM, so don't mix 667 and 800 or all will work as 667 for example... 
     
    2.  I had an issue with the mouse pointer which turned out to be the video driver.  After loading the latest video driver(2600xt) provided from dell tech, I can not enter the catalyst control center.  When I click on it the mouse will turn to a circle for a couple seconds and then turn back but catalyst will never load no matter how many times i click on it.  I've rebooted several times.  Ideas? Sorry I have nvidia card...
     
    3.  When I apply power (i.e. turn on the power strip but NOT turn on the actual computer) to the system, everything will light up for about a second like it's going to boot up but then will go out.  I would expect that simply turning on the powerstrip would result in nothing.  Is everyone's 420 like this or do i have a defective power supply? Yes that is normal...


    Message Edited by packerFan07 on 01-02-2008 07:44 PM
  • Davet50

    6 Operator

    •

    14442 Posts

    244

    0

    Posted January 2nd, 2008 23:00

    i can answer # 3 this is normal. you should only turn the computer off by the power button and leave the stip on or it will do this. Seem to be a small amount of power is needed to enable the system to boot up quickly. The 7xx series do this as do the  4xx series.
    as to the memory it should be the same brand but normally as long as the specs are the same it should work. I would bring this to Dell's attention and make them supply you with all three stick the same.
     
     
    Go here and download either the complete package or the individual files.
     
     
  • johnb111

    30 Posts

    244

    0

    Posted January 3rd, 2008 01:00

    Ok, I tried that driver and i get the same result.  Nothing in that folder works...not even the help file.  I'm stumped!!!!!!!!!!!!   There's got to be a setting somewhere that has disabled any advanced video settings.
     
    Regarding the memory, not only was the replacement memory a different brand, but it was also refurbished!  I could have sworn I paid for a new computer...... 
  • 244

    0

    Posted January 3rd, 2008 12:00

    I had the same issue with the video driver on my 420 (2400HD). Updated to the latest Catalyst driver package and could not get into the control center.  Spinning circle, no program.
     
    I also had other issues with programs not installing correctly or working at all (Photoshop CS3) so I ended up re-installing the system from the Recovery Partition to the way it came out of the box.
     
    Now I have the mouse problem again and still cannot get PS to work.....
     
    It's going to be a long winter.
     
    John
  • Davet50

    6 Operator

    •

    14442 Posts

    244

    0

    Posted January 3rd, 2008 14:00

    try loading netfram 2.0?? i have 1.0 an 2.0 running on my XP system..again not sure about Vista...just a thought
  • Davet50

    6 Operator

    •

    14442 Posts

    244

    0

    Posted January 3rd, 2008 14:00

    johnb11
    I dont know if this is still required but in the past in order to get the catalyst center to run you had to have netframework installed on the system..I don't know if Vista still has this or if this is still a requirement..have you contacted ATI about this?
     
  • johnb111

    30 Posts

    244

    0

    Posted January 3rd, 2008 14:00

    Glad to hear it's not just me having the problem......maybe ChrisM will chime in??????????
     
    Regarding .net framework....I'm showing .net 3.0 installed on my system (came this way from the factory, and installs every time i've factory restored from the partition).  I would assume it would be backwards compatible with 2.0.  I've read elsewhere that Catalyst requires .net 2.0.  I guess this is my problem if .net 3.0 is not backwards compatible with 2.0.
     
    Thoughts?
  • johnb111

    30 Posts

    244

    0

    Posted January 3rd, 2008 14:00

    Ok, I tried uninstalling catalyst from the control panel, and reinstalled Dell's latest (R170619).  Now I am getting errors....
     
    When the system boots up:
     
    Catalyst control center: Monitoring program has stopped working
    Description:
      Stopped working
    Problem signature:
      Problem Event Name: CLR20r3
      Problem Signature 01: mom.exe
      Problem Signature 02: 2.0.0.0
      Problem Signature 03: 4660329a
      Problem Signature 04: mscorlib
      Problem Signature 05: 2.0.0.0
      Problem Signature 06: 4536f11f
      Problem Signature 07: ee0
      Problem Signature 08: 7
      Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
      OS Version: 6.0.6000.2.0.0.768.3
      Locale ID: 1033
     
    And when I manually try to run catalyst:
     
    Command line interface has stopped working
    Description:
      Stopped working
    Problem signature:
      Problem Event Name: CLR20r3
      Problem Signature 01: cli.exe
      Problem Signature 02: 2.0.0.0
      Problem Signature 03: 466032c5
      Problem Signature 04: mscorlib
      Problem Signature 05: 2.0.0.0
      Problem Signature 06: 4536f11f
      Problem Signature 07: ee0
      Problem Signature 08: 7
      Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
      OS Version: 6.0.6000.2.0.0.768.3
      Locale ID: 1033
     

     
  • Davet50

    6 Operator

    •

    14442 Posts

    48

    0

    Posted January 3rd, 2008 16:00

    if you used dell's control panel and ATI's driver there may be a conflict..
    I would suggest you contact/post this on the ATI site or look around there to see if others are having the same issue..