UNSOLVED

CrankyPants

updated

20 years ago

0

8034

March 23rd, 2007 22:00

Where does the power-on button connect to the motherboard of a Dimension E520?

Hi,
 
I'm trying to work out where the wires from the power-on button (i.e. the switch at the front of the box) connects to the motherboard on a Dell Dimension E520. I need to unplug the leads from the mothweboard and then connect them to a  COMPRO VideoMate T750 TV Tuner Card (hardware overview of T750 is available here). This card allows you to power-up the PC through the use of a remote control when in sleep/hybernation mode.
 
The manual identifies various components on the the motherboard but not the connectors for the power-on button. I've tried to follow the leads inside the box but they appear to be hidden. Any help would be greatly appreciated.
 
Kind regards,
 
CrankyPants
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    204

    0

    Posted March 23rd, 2007 22:00

    You're not going to be able to easily do this. The power lead is part of a single, large block of wires on a single ribbon cable. Unless you're handy with cutting and splicing, and with a multimeter to find out which wire does what, forget it. If your system is under warranty, you'll void it if you do the splicing you'll need to.
  • 204

    0

    Posted March 23rd, 2007 23:00

    Thanks for the quick response. Not exactly the answer I wanted (but I expected this might have been the issue). Looks like I won't be able to power-on the PC with the remote - no biggie.