
UNSOLVED
I
i_always_love_y
17 Posts
0
19474
October 12th, 2005 22:00
Video Card Cooling Help
If I add this to my video card, will it lower my temperature of my video card?
Responses (9)
Solutions (0)
CSPlayer089
563 Posts
269
0
Posted October 12th, 2005 23:00
if that is the universal graphics card fan by bfg, i would not get it. get a cooler that is specifically designed for your card. and get brands like arctic cooling and zalman.Ragamuffin143
38 Posts
269
0
Posted October 13th, 2005 01:00
It may, but only a degree or two. Especially because those ram heatsinks look like aluminum, rather than copper, which conducts heat better. If all you want to do is add heat sinks, try these copper ones:You can also add what's called a "slot cooler" or "exhaust coller;" it sits in the PCI slot right next to your video card and blows hot air out of your case. However, they're a tad on the loud side. You can pick one up for $10 at Compusa or your local radioshack or computer store:http://www.compusa.com/products/product_info.asp?product_code=50063202&pfp=srch1However, If you really want to cool down your video card (and do it quietly!), add an Arctic Cooler NV Silencer, like this one for 6600GT's:There are different models of Silencers depending on what type of nVidia-based card you have. They also make them for ATI cards. The Silencer/Card compatibility list is on their website:They're fairly simple to install (really!). Although you may loose a PCI slot or two. I have one installed on my MSI GeForce 6600GT. Here's a nice page showing step-by-step installations of an NV Silencer (with photos!). This is the exact set-up I have in my Dimension 8400:Here's another good installation how-to with photos:This is a great "first-timer" mod project! It's difficult to screw up! In the instructions listed above, when you are told to clean off the old thermal paste, do so with 99% rubbing alcohol and a Q-tip. Make sure the GPU and Ram are completely clean before putting on new thermal paste! Use a credit card to spread out the thermal paste over the GPU, and make sure you only have a very thin layer!I agree about copper vs. aluminum. Unfortunately, the last time I checked, the Arctic Cooler models for the 6600GT are only designed for the PCI-E models. I have researched with them about an AGP model - not available, hopefully that has changed.
A point to keep in mind may be to increase the air-flow through the computer case. You can add any number of heatsinks, but if the air flow isn't there, the hot air just stagnates.
Good luck,:smileyhappy:
B4runo
DIMM 4400
BIOS – A06, date 6/12/02
Win XP Home Edition, SP2
Pentium-4 2.8 GHz, 400MHz FSB, 512K L2
1 GB DDR SRAM PC2100
80GB WD 7200RPM, 200GB WD 7200RPM EIDE/ATA HDDs
Iomega 80GB USB 2.0 External HDD
Pioneer DVR-109BK, Samsung DVD-ROM SD-616R
Leadtek GeForce 6600 GT 128MB DDR 8X AGP
17”, 1702FP Digital Flat Panel Display
PCP&C Turbo-Cool 425 Deluxe Dell PSU
SIIG US2275 USB 2.0 / 1394a / NIC PCI card
Courteous Dell Community Forum members search first, then post.Ragamuffin143
38 Posts
269
0
Posted October 13th, 2005 19:00
Not sure about whether AGP cards are supported. However, if you can't add an NV Silencer, then your next bet is a Zalman silent fan. Indeed, I think a Zalman fan provides even better cooling than an NV Silencer. However, we're dealing with Dell cases here, and Dell cases have the absolute WORST air flow. Ever. They don't even have a front in-take fan.The Zalman cooling solution does not expell the hot hair out of the PC case like the NV Silencer, but spit it into the case, and assumes that you have good enough air-flow in your PC case to expell the hot air.You can find several websites that show the installation of a Zalman fan on a video card (with photos) by doing a quick Gogole search for Zalman VF700 Review. If you decide to Buy this, make sure you get the VF700-CU, because that is the ALL COPPER one. The vanilla VF-700 is mostly aluminum, and doesn't cool as well as copper. The CU version is only $5 more.Here is the fan I'm talking about:Ragamuffin143
38 Posts
269
0
Posted October 14th, 2005 03:00
I also like this take on the slot cooler (on paper, at least). It has a fan controller so if you're concerned about noise, you can turn the fan down when you're just reading email and stuff, and turn it up when you're gaming. It expels hot air and also increases air circulation with the second fan (which, again, is always good with a DELL case). Nice photos detailing intallation.
@Ragamuffin143 wrote:
I also like this take on the slot cooler (on paper, at least). It has a fan controller so if you're concerned about noise, you can turn the fan down when you're just reading email and stuff, and turn it up when you're gaming. It expels hot air and also increases air circulation with the second fan (which, again, is always good with a DELL case). Nice photos detailing intallation.
Does anyone have any actual experience with this product? Interesting concept.....
shanahanfanpat
9 Posts
269
0
Posted October 16th, 2005 03:00
sorry bruno, but quick arctic cooling plug. i got one of their cooling fan/heatsinks for my ati 9800xt and its amazing! now i walk into the room and many times i've pushed the power button on the computer thinking i had to turn it off when it was already on. installation was a cinch too. and it even came with a vent to replace the adjacent pci slot opening in the back with, so that the air that passes through the heatsink blows out the back of the case instead of recirculating inside the case. anyways, thats my plug.
@shanahanfanpat wrote:
sorry bruno, but quick arctic cooling plug. i got one of their cooling fan/heatsinks for my ati 9800xt and its amazing! now i walk into the room and many times i've pushed the power button on the computer thinking i had to turn it off when it was already on. installation was a cinch too. and it even came with a vent to replace the adjacent pci slot opening in the back with, so that the air that passes through the heatsink blows out the back of the case instead of recirculating inside the case. anyways, thats my plug.
shanahanfanpat:
I agree, I have read great testimonials about arctic cooling products. My point was that I was lamenting that they don't produce, as yet, an arctic cooler model that is designed for the Nvidia 6600GT AGP card. :smileysad: If, and when they do, I might be interested in trying one out. I am glad that their product is working out for you.
Cheers,:smileyhappy:
B4runo
DIMM 4400
BIOS – A06, date 6/12/02
Win XP Home Edition, SP2
Pentium-4 2.8 GHz, 400MHz FSB, 512K L2
1 GB DDR SRAM PC2100
80GB WD 7200RPM, 200GB WD 7200RPM EIDE/ATA HDDs
Iomega 80GB USB 2.0 External HDD
Pioneer DVR-109BK, Samsung DVD-ROM SD-616R
Leadtek GeForce 6600 GT 128MB DDR 8X AGP
17”, 1702FP Digital Flat Panel Display
PCP&C Turbo-Cool 425 Deluxe Dell PSU
SIIG US2275 USB 2.0 / 1394a / NIC PCI card
Courteous Dell Community Forum members search first, then post.

Brainonska511
1122 Posts
269
0
Posted October 12th, 2005 23:00
Before applying ram-sinks, try to move the PCI cards as far away from the GPU as possible. Also, you might want to try a PCI slot fan first to see if it can slice a few degrees off the card.