
UNSOLVED
Upgrading the Processor on Dell Dimension 8200
Hi,
I had bought a Dell Dimension 8200, 3 years ago with Pentium 4 , 1.8 Ghz...
I'm still happy about the system...
I had been upgrading the RDRAM and Graphics card over the last few years on the same machine..
My specs are
P4 - 1.8 Ghz
RAM - 2 GB RDRAM w/ECC
Graphics Card - Quadro 750 XGL
I had been primarily using it as a multimedia PC...
I wanted to know if upgrading the processor to a P4 2.8 Ghz (From my Gaming PC) would have any compatibility issues on the mobo...
I'd appreciate any help or suggestions,
Regards,
oreba
Responses (5)
Solutions (0)
- The motherboard that you are using will most likely not support an upgrade to that processor. The other side to that coin is that the higher level processors are using MB's that only support the DDR memory and your using rambus. To change that processor you will most likely also have to replace your MB and memory and at that point it would probably be cheaper just to buy a new computer.
- You can upgrade to the 2.8GHz without any mobo issues. A great site for D8200 upgraders to look at.Dimension 8200 (July 2002)3.06Ghz P4 w/HT 533fsb
768mb pc800 rdram
128mb BFG GeForce 6800oc
56K PCI Data Fax Modem
Turtle Beach Santa Cruz DSP sound card
Intel 10/100M PCI Network Card
80GB Ultra ATA/100 drive
40X CD-RW
Windows XP Home SP2
Dell 250W psu

ejn63
11 Legend
•
87469 Posts
•
321256 Points
142
0
Posted March 29th, 2005 22:00
The 2.8/533 or 2.8/800 will not run at full speed on this system.