
UNSOLVED
Understanding diagnostics
When running the Dell diagnostics on a GX150 it locked up at one point which was after the memory test and before the hard drive test. It locked up on the usb test. I swapped the single stick of memory out just because it was the easist thing to do first and ran the test again. This time diags started and suddenly stopped, returning to a C prompt (or some other drive letter). Next I replaced the system board and put back in the original memory and it passed. Great, bad system board. But just for sport I put back in the original board again and ran diags just for confirmation. It passed diags this time. And again after that.
This leads to my question. What resources are being used when diags are running? Is the hard drive only being used if it is being tested? Is the memory only being used if it is being tested? I'm assuming the processor has to be used the whole time. Any ideas anyone?
Diags were being run because this computer keeps locking up. We had already reimaged the drive. Although I could run diags with either system board Windows 2000 will not reach the log in prompt on a new system board....I tried two others although they may have been the same version. I'm going to ghost the drive to a different hard drive to see if it will work with a new board.
I know this post seems long but I have become very confused. I have been supporting Dell pc's for over four years and I have never had a GX150 system board not work with a particular hard drive/image.
Responses (3)
Solutions (0)
- Improper heatsink = lockup computer.
Corrupted Registry, Spyware, Virus, FULL HARD DRIVE NO SPACE LEFT, = Lockup during or before login.
If you boot the machine with a dos disk and let it run for days and no lockup then
the software and or hard drive is suspect. - Thanks for the input but this thing has been locking up intermittantly so I was suprised to see the diags find anything at all. When the user called me today it had been running fine for 5 days. I have to have her back up early Monday and I should of been able to just put her hard drive in another GX150 but I wasn't able to because it locks up before the login prompt. This is unrelated to the locking up she is having problems with. This is a "hard" lock up everytime before the login when I use a different system board. I can give her computer back to her in it's original condition but she will call back in few days with the same problem.

speedstep
11 Legend
•
46969 Posts
143
0
Posted October 22nd, 2005 00:00
Lockups on the GX150 can be totally UNRELATED to memory and other Items.
Specifically they have to do with a lack of heatsink Grease and or improper heatsink mounting.
Make a Live Linux CDROM like Knoppix or Linspire Live and leave the hard drive off altogether. Just boot from the Linux cd and see if the system runs and surfs the internet ok.
http://media.linspire.com/cnr_linspirelive/
http://www.frozentech.com/content/livecd.php
Make sure you burn the Linux cd at 4x or 8x maximum speed so that its reliable.
If the CDs also bad I would try TOMS RTBT Linux on a floppy as a test.
http://www.toms.net/rb/