
UNSOLVED
Responses (4)
Solutions (0)
DavidGregg
73 Posts
347
0
Posted December 19th, 2004 19:00
Operating system? Dell system specs what Dimension? Exact error wording?
To reply to this message use the reply button. Do not start another message with new message .
Click this link for some Dell Talk "tips".Philly7835
1 Message
347
0
Posted December 20th, 2004 01:00
Windows XP SP2, Dell Dimension XPSP4 3ghz w/ HT1024 DDR RAMRadeon 9800Audigy 2180 gig harddriveAlright whenever I try to open my volume controls from the task bar this message pops up twice, "Unable to change the sound device to your selected device." After I click ok twice it will ask to send an error report to windows which says - Error signature, Appname:surmixer.exe Appver: 3.1.7.0 ModName: mfc42.dll ModVer: 6.2.41.31.0 Offset: 000250f7It asks to send another error message when I try to open the EAX console that says error signature with Appname: ctcms.exe. Also if I try to open speaker settings I get an error that says SpkSet.exe has encountered a problemWhenever i run the Dell Creative Diagnostics all tests pass except the SoundFont test which will fail even after I fix itDavidGregg
73 Posts
347
0
Posted December 20th, 2004 16:00
Philly7835,
I believe the first thing that you want to check is Control Panel|Sound and Audio Devices|Audio tab; there make certain that "SoundBlaster [Audigy] is the preferred device", and that "use only the preferred device" is checked. You may need to go into your BIOS also and make certain that any onboard integrated sound has been disabled. If you have a headset, it should be disabled too until you correct this problem.
Then, if the problem is not corrected by these measures, it may be necessary for you to reinstall your Dell OEM Audigy 2 drivers, using the Product Support|Service Tag ID|your system identification|SoundBlaster Audigy 2|User's Guide directions. Do not proceed with a reinstallation until you read your User Guide directions thoroughly. There ought to be mention of a Uninstallation file patch that needs to be run before anything else. If there is no mention, then you may need to bypass Dell's OEM drivers and go directly to Creative. (see no. 4 below for suggestions).
For possible corroboration of the above read the following links:
- http://it.europe.creative.com/support/forums/thread.asp?thre=18135
- http://fi.europe.creative.com/support/forums/thread.asp?thre=43676
- http://www.bluesnews.com/cgi-bin/viewpost.pl/45274
- http://delltalk.us.dell.com/supportforums/board/message?board.id=dim_audio&message.id=46922&view=by_date_ascending&page=1
DavidGregg

phil7023
2 Posts
347
0
Posted December 19th, 2004 16:00