UNSOLVED

edelmand

updated

21 years ago

E

edelmand

3 Posts

0

11993

November 12th, 2005 17:00

system problem pppplease helpppp

I have a Dimension 4400 pentium 4 and I am running microsoft windows XP.  Recently the computer said there was a microsoft service pack for update and I told it ok to download.  When the computer rebooted itself it came up with following:
Windows could not start because the following file is missing or corrupt:
\WINDOWS\SYSTEM32\CONFIG\SYSTEM
 
You can attempt to repair this file by starting windows setup using the original setup cd-rom
Select 'r' at tge first screen to start repair.
 
Well when I put the cd in the drive and hit the 'r' key it shuts down and comes back up and does not seem to recognize that I have a cd in the drive.  I have tried to hit the F2 and F8 and r key on the first screen that comes up (the dell logo) and all it does is reboot. 
 
I have gotten it to come up to a screen that says, please select the operating systen to start:
Microsoft Windows XP Home Edition and I hit f8 to trouble shoot.  I have tried selecting safe mode and debug mode and reboot and start normally but nothing seems to work.
 
Any suggestions?  I am using another computer right now trying to get my better one fixed.
 
I don't know a whole lot about computers but I am trying. 
 
I did call microsoft but they say it isn't their update that caused the problem call DELL.
 
Thanks so much..
  • 360

    0

    Posted November 12th, 2005 17:00

    Are people afraid to use Google?

    Goto www.google.com and type "SYSTEM32\CONFIG\SYSTEM missing" (without the quotes), and you'll get 6,380 pages of answers you'll need to try and repair this.

    Because it's an OEM machine and not a retail one, the proposed solutions may not work.  I know the solution, and I've never had it work on an OEM system even once (unless they tell me that they have reinstalled a retail copy).

  • Ice-blue

    27 Posts

    360

    0

    Posted November 12th, 2005 18:00

    This solution worked for me: http://www.kellys-korner-xp.com/xp_sys32.htm
     
    I'm not so sure since you mentioned another problem that I didn't encouter when I got that error (the shutting down when you pressed the any key).
  • edelmand

    3 Posts

    360

    0

    Posted November 12th, 2005 19:00

    Thanks for trying, but everytime I hit a key it just keeps rebooting to the error screen.  I can't seem to get to a prompt to type anything in.  Any other ideas?  It doesn't seem to realize that I have a disc in the drive.
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    360

    0

    Posted November 12th, 2005 23:00

    You have to go into Bios setup (press F2) first and change the boot sequence so the CD drive is first. Right now the HD is first so the PC isn't even looking for the CD drive. Once you make that change, put the XP CD in the drive, save the new boot sequence and exit Bios. It should boot directly from the CD.

    After you fix the problem, don't forget to go back into Bios and change the boot sequence back so that HD is first on the list.

    Ron
  • edelmand

    3 Posts

    360

    0

    Posted November 13th, 2005 23:00

    LOVE YA!!!!!!!!!!!!!!!!

    I wasn't quite sure what I was doing and it took a couple of times for it to accept the F2 button....but it finally did and I figured I couldn't mess up the computer any worse than it was already.

    Thanks so much for your expertise.  Hopefully I will remember what to do if this happens again.  I guess I just should not allow it to download the service pack from microsoft.  For some reason my computer doesn't seem to like it.

     

    Thanks again,

    Debbi

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    360

    0

    Posted November 14th, 2005 00:00

    Debbi,
    I take it that you were able to fix the problem. :)

    Are you running XP, XP SP1, or XP SP2? If you're not running SP2, the updates will certainly mess up your system. In that case you definitely should get SP2. If you do have SP2, then it isn't a good idea to stop updating it. Microsoft puts out those updates to plug holes which may let an intruder read or erase all your personal info, crash your PC completely, or even use it to send out malware.

    Unfortunately, as you found, the updates can sometimes cause problems, but those aren't too common so hopefully you won't have further troubles.

    Ron