UNSOLVED

pjgribb

updated

26 years ago

P

pjgribb

5 Posts

0

7370

March 1st, 2001 18:00

SDRAM upgrade question?

I have a Dimension L600r System with 128 SDRAM. I would like to up-grade to 256 SDRAM; do I need to buy another 128 of SDRAM or 256? Also do I need to do anything to my system for it to recognize the added memory or will it detect it automatically?
  • pupowski

    19 Posts

    283

    0

    Posted March 1st, 2001 18:00

    I just buy crucial cas2or3 and pop it in. SDRAM is dirt cheap lately, + free shipping & lifetime warranty. 256mb is under $90.00, 128mb about half that.
  • howem

    36 Posts

    283

    0

    Posted March 1st, 2001 21:00

    Depending on how much $$ you wish to spend its your choice of 128 or 256 MB additional RAM. Your system should recognise the new RAM automatically once installed. Takes less than 5 minutes to install.

    Go to www.crucial.com and use their memory selector to find and order the correct memory for your system. Also you may wish to visit their FAQ page to anwer any questions about RAM that you might have.

    RAM is cheap so you might wish to purchase a 256 mb stick especially if you anticipate future resource requirements to increase.

    Hope this helps and good luck...Mike

    Dimension 4100
    PIII 933 MHz
    384 MB SDRAM
    60 GB 7200 RPM HD
    Soundblaster Live! Value Card
    Conexant HCF V.90 56K RTAD, Speakerphone PCI Modem
    NEC DV-5700A 12X DVD ROM
    LG 8X CD R/W
    NVIDIA TNT2 M64 4XAGP
    Win ME
  • pjgribb

    5 Posts

    283

    0

    Posted March 2nd, 2001 15:00

    Thanks for the information.
  • howem

    36 Posts

    283

    0

    Posted March 2nd, 2001 15:00

    Welcome....

    Go to www.crucial.com/webpromo for an additional 5% off new RAM.

    Mike

    Dimension 4100
    PIII 933 MHz
    384 MB SDRAM
    60 GB 7200 RPM HD
    Soundblaster Live! Value Card
    Conexant HCF V.90 56K RTAD, Speakerphone PCI Modem
    NEC DV-5700A 12X DVD ROM
    LG 8X CD R/W
    NVIDIA TNT2 M64 4XAGP
    Win ME