UNSOLVED

tacoma200

updated

20 years ago

T

tacoma200

6 Posts

0

13097

December 13th, 2006 18:00

Refurbished XPS 410 questions

Love the computer but it has locked up when booting up and shutting down a couple of times? Not sure if I should keep it or this is just something I shouldn't worry about.

How much memory do I need? Since it was refurbished they only sent it with 512 (samsung) memory. If I don't game how much do I need. Photoshop and internet use are my main uses.

When I do upgrade memory is there a place I can get a good deal on a couple of 1 mb sticks or would you buy from Dell to make sure it was compatible. I may play games in the future so memory upgrade will happen if I keep it.

The tower with two dvd drives cost me only $499 so I thought it was a good deal even with only 512 memory so I hate to send it back.
  • tacoma200

    6 Posts

    405

    0

    Posted December 13th, 2006 18:00

    No I figured they reinstalled it when it was refurbished but I may give that a try. Even when I call Dell to get info on buying a memory upgrade the sales persons seems confused and told me the XPS 410 had two different cases and only certain memory would work depending on which case I had. He seemed to have to go read up on it while I was on the phone so I opted out thinking he didn't seem to know what he was doing. All the different memory is a little confusing to me. My packing slip says 2x256 533 1R Necc but the memory in the computer is Samsung 256x2 1RX pc2 4200u. I see cheaper memory offered on Ebay but I'm afraid of compatability issues. I would like to end up with 2 GB.
  • contrvlr

    1359 Posts

    405

    0

    Posted December 13th, 2006 18:00

    Go to Crucial.com and use the memory configurator there. The memory is guaranteed to work or your money back, and is likely less expensive than Dell since they have raised the prices.And you won't have to deal with tech support on the phone:smileywink:
    _________________________________________________________________________________
     
    Oh yea, I have gotten three 410's from the outlet and had no problems wether I've reinstalled the OS or not.

    Message Edited by contrvlr on 12-13-200602:47 PM

  • majortom23

    25 Posts

    405

    0

    Posted December 13th, 2006 18:00

    did you reformat the drive and reinstall xp? I find that on dell computers usually before you do anything to them redoing the oeprating system is the nest way of doing things. When I receive my xps 410 I will be doing just that :)
  • tacoma200

    6 Posts

    405

    0

    Posted December 13th, 2006 19:00

    That's what I figured. Use the faster memory. I wonder what goes on at the refurbished center. They seem to install slightly smaller hard drives (160 sata) and use less and slower memory. Case in point mine came with 512 when the minimum you can buy now on an XPS is 1GB. I doubt that I will have much trouble with this system. Its more than I need now but Something I can build on. Thanks
  • tacoma200

    6 Posts

    405

    0

    Posted December 13th, 2006 19:00

    Went to the crucial site. Very easy to order there. I ordered 2x512 667 should I still use my two 256 533 modules with it or will I be better off to run just the two 512 667 modules. I know the 533 will slow it down but if I use all four I should have about 1.5 GB.
  • pointguard1122

    1891 Posts

    405

    0

    Posted December 13th, 2006 19:00

    I would recommend not using the slower RAM.  If you want more, you are better off buying more later. 
  • 405

    0

    Posted December 15th, 2006 23:00

    Who ever bought it set the computers config.. Every single system is different at outlet so u have to read each one and see..
    My scratch and dent(with not a scratch or dent) 410 has 2 gigs and photoshop is still a hog so the more thebetter..
  • tacoma200

    6 Posts

    405

    0

    Posted December 16th, 2006 00:00

    Wow I just assumed they reinstalled the operating system as a new install which would make it like a new one (no photoshop). So when I do a fresh install everything should go back to the way it would have been new and these small software glitches that rarely ever happen should disappear. Right now every thing is running well except for a blue screen a few days ago that was supposed to be due to a software problem with Roxio the report said. It hasn't happened since but here is what it said.

    This problem was caused by Roxio's UDF Reader (udfreadr.sys). Roxio's UDF Reader (udfreadr.sys) was created by Roxio, Inc..

    A solution is available that will solve this problem.

    Solution

    Go to the Roxio, Inc. website to learn more about the solution.

    Never did find the fix but it hasn't happened since so cross my fingers on that one. I swear this computer has given more problems in the first month than my 4500 did in 5 years. Hopefully the reinstall of the OS when I get around to it will fix any such problems.
  • 405

    0

    Posted December 16th, 2006 01:00

    I meant hardware configs are done by original purchasers.. Dell redoes os though.. You get it at first start up.. 
     
  • tacoma200

    6 Posts

    53

    0

    Posted December 18th, 2006 21:00

    Well it's been running great for several days now, what ever issues the software had seem to have worked themselves out. The memory from Crucial worked without incident. Thanks.