
UNSOLVED
(Redirected) Windows 10, restart Issue on Dell 3646-Inspiron
Windows 10 Update, restart Issue.
This Dell 3646-Inspiron is only several weeks old.
Was first updated via windows update, subsequent installations done with ISO DVD
Dell’s support web page says 3645-Inspiron is compatible with WIN 10
I have been trying to resolve this issue for over two week.
Will not do a restart/boot after 1 normal Shut Down, Hangs at Dell logo, no keyboard Function or anything, Power indicator remains on. No Post codes because it doesn’t try to Post. Have to do a Forced power off than it will boot. Normal power on boot ups work fine.
If you do a F2 go into setup, make no changes just save/exit and boot, you can do restarts all day long. Until you do (1) normal shut down and startup, then restart will not work. Until you do (1) normal shut down and startup, Then restart will not work.
Tried Safe mode, Update Bios, cleared CMOS, Ran all dells diagnostic and those included on the Win 10 ISO DVD no issues were found and etc. Even disabled fast shut down/fast start and it made no difference. Selectively disable all service and startup menu services. Have several boot logs and they identical with the exception that the sequence of loading varies slightly between boot logs but all the same items are loaded every time. It would be nice if there were a restart log.
Issue seems to have an association with System Service “POWER”.
With System Service “POWER” Disabled you can due normal Power up/Shout downs and restarts all day.
But you can’t access any of the power settings and the wireless adapter is disabled. So disabling System Service “POWER” is not an acceptable solution, but it may be some sort of clue
One of the last tests was restore Win 8.1 to verify all works, than did clean install of Windows 10 from ISO DVD, no other programs installed.
After boot up did a couple of restarts and then did (1) normal shut down and power on startup, Then 1 restart which failed to restart.
Observed Boot sequence
1. Normal start screen lightens and key board indicators light for 3 or 4 seconds
2. Then circle dell logo appears, 4 or 5 seconds.
3. After that Key board indicators turn off and Dot Pinwheel starts (This is Post Time).
4. Than screen goes blank for many seconds, and windows startup with welcome + Dot Pinwheel appears four may seconds until
5. Your desk top appears, additional boot up continues in background for a minute or so. You may get pop up message if various apps didn’t get started fast enough.
When restart doesn’t work, restart shutdown screen appears (Similar to normal shutdown screen), Screen etc. flickers as startup begins and it stops between steps 2 & 3 above.
(Believed to not even start Post, that’s why there are no beep or led error codes).
Something seems to be changing something associated with BIOS CMOS settings, when a normal shut down vs. a restart shutdown. Otherwise doing a Bios save/exit and boot wouldn’t make restart work until you down a normal shutdown. Don’t know how to figure out what’s being changed and why.
Has anyone else has reported this same issue?
Have any Ideas on what to try to fix it?
Responses (1)
Solutions (0)

shesagordie
12 Elder
•
46017 Posts
723
0
Posted August 28th, 2015 20:00
Best to post this in the Windows 10 forum here:
http://en.community.dell.com/support-forums/software-os/f/4997
Bev.