
UNSOLVED
Problems with a Radeon 9800 PRO card in my Dimension 4400
Heya all I am trying to upgrade my Dimension 4400 with a Radeon 9800 PRO card, without success. Can anyone offer any advce on this? The card is fitted OK, all the old nVidia drivers are unloaded, and the default VGA drivers seem to work OK. But that's it - I get an 'incorrect configuration' message in device manager, I can't get the PC to load up the ATI drivers, etc. I have a sneaking suspicion that there's is a simple fix for this; however this is my first foray into messing about with graphics cards so if you could do me the courtesy of talking me through it as you would a seven year old that's trying to land a plane that'd be appreciated. Cheers
Responses (13)
Solutions (0)
- Certainly did - although I did have problems finding any motherboard AGP drivers to upgrade. No AGP or GARTs mentioned at all in the system devices list in device manager, except an 'Intel 82845 processor to AGP controller 1A31'. I also tried manually installing the card drivers using the hardware update wizard, but this threw up a 'The parameter is incorrect' error.
Did you un-install the old driver thru Add/Remove than use a driver cleaner to get all the old stuff out, before installing the new driver ? Did you turn off your anti-virus software first before installing the driver ? Very important
http://www.drivercleaner.net/ Download site for a good driver cleaner.
- Tried that - the express setup crashes out after Hydravision and DX9 before the Catalyst drivers can get loaded ('The Instruction at 0x771c76cb referenced memory at 0x00169340. The memory could not be read'). In custom install I don't even see the Catalyst drivers as an option.

VCraig
2 Intern
•
2106 Posts
531
0
Posted November 23rd, 2004 19:00