
UNSOLVED
M
mccabe_imperial
8 Posts
0
2260
July 26th, 2000 12:00
problems on shutdown
our company recently purchased 5 new dell dimension XPS T700r PCs. a few of them have been having problems shutting down. at the end of the day we do a shutdown from the start menu and then restart. when people come in the next morning, the monitor are all black, with the light flashing green. the tower is on, the light is green. however, you can not make the monitor turn on by moving the mouse or by hitting any key on the keyboard. finally i decided to turn the power off on the tower but the power button does not turn the power off to the PC. i have to physically pull the power cable from the back of the PC then plug it back in. once i do that the PC will boot. when it boots i get an error message about a stuck key error, press to resume. after pushing the PC boots fine. can someone please help!!!!
Responses (8)
Solutions (0)
mccabe_imperial
8 Posts
597
0
Posted July 26th, 2000 15:00
i set all these settings to "Never" and i am still having this problem. the PC shuts down to a blank monitor, almost like dos mode with a cursor. the monitors green lite is flashing but you cant get to turn on by moving the mouse or pressing keys on the keyboard. even turning on and off the monitor doesnt work. after getting the PC to reboot the monitor turns on to "stuck key errors", after pressing to resume the PC boots fine. problems are with shut down. any other suggestions.scottbickford
2 Posts
597
0
Posted July 26th, 2000 15:00
David,
Standby is set to Never on both of the PCs already. The monitor shut down was set to 15mins and hard drive to 1 hr. I'm going to try Never for the hard drive. I notice others are having similar probems . . . your solution to set standby to Never - is this a known problem resolution for something else maybe? I guess I don't have a warm & fuzzy that Dell knows what's going on here? One Dell Dimension was purchased last December, the other just recently. Would think this has been happening for sometime(not just to my clients) so I'm hoping for a better explaination/solution????
Thanks for your quick response,
Scott- I just received my Dimension 4100 computer for two days, and I am already experiencing problem with shuting down the computer. I would have to press the reset button to get the computer to reboot and try to shut down again. Sometimes I have to do this four, five times until the computer can actually shut down. I guess I am not alone on this issue. Is this a problem that has been persistent for some time now? How come Dell still has not come up with a solution?
Bluehippo mccabe_imperial
8 Posts
597
0
Posted July 26th, 2000 18:00
Bluehippo, did you try setting your power stand by to "Never" like David told us? it was great help until i tried rebooting and ran into the same problem. i guess be patient since my company bought 5 new dell dimensions XPS T700r 2 months ago and i still havent recieved a fix for the problem in that time frame.- I got some help through the telephone when I call in for technical support. Basically Dell's technical help told me to restore the original settings on my computer, and the problem seems to go away for now. Try it and see if this would resolve your problem!
mccabe_imperial
8 Posts
597
0
Posted July 27th, 2000 16:00
restore what setting to the original settings? has this worked in your case? if so let me know. thanks.

David .
2 Intern
•
1097 Posts
597
0
Posted July 26th, 2000 14:00
Incidentally, if the system is locked, to turn it off, press and hold the power button for 7-10 seconds.