UNSOLVED

Rgon_Amps

updated

10 years ago

R

Rgon_Amps

13 Posts

2

114461

November 5th, 2015 16:00

Optiplex 9020 MT i7-4790k Upgrade !!

Several of you have upgraded your Dell desktop with an Intel Core i7-4790k cpu. I'd like to add another data point, my Optiplex 9020 MT with a 4790k. It replaced an i5-4570   3.2GHz. Thanks for your professional advice and encouragement.

The 4790k is in continuous Turbo Boost mode.The core frequencies are selected according to this performance schedule:      4.4 GHz - up to 2 active cores; 4.3 GHz - 3 active cores;  4.1 GHz - 4 active cores. Odd quirk here -- turbo multiplier 42 is missing??  CPU-Z multipliers vary from 44, 43, to 41. The cpu (stressed) runs at 4.1 GHz. Using Samsung Performance Power Plan optimized for my 850 Pro 256 GB ssd. Hyperthreading is enabled.

I used Dell's bolt-on fan and heatsink (twice as big as Intel's) with Arctic Silver 5 TIM.

Currently, the bios for the Q87 chipset mobo does not display overclocking parameters. I'm OK with that... no games, I do real work  :emotion-15:. Here are some interesting screenshots --

         Above:      Spread Spectrum at work on the Bus Clock -- range is 99.76 - 100.24 MHz approx.

  • The Fred

    1 Rookie

    •

    12 Posts

    17539

    0

    Posted November 9th, 2015 13:00

    Thanks for the update on this combination.


    You mention constant Turbo mode. Does the CPU never throttle down in light load? Like throttle down to 800MHz to save power and lower CPU temp. It appears that way even though CPU-Z shows a multiplier range of 8-44. Maybe I'm not reading this right.

  • Rgon_Amps

    13 Posts

    17539

    0

    Posted November 9th, 2015 15:00

    If I select Dell's Balanced Power Plan, the 4790k does indeed throttle down to 800 MHz. And, yes, it does save power and lower the cpu temp. I'm running Windows 10 Pro.

    The x8 - x44 on CPU-Z are the available multipliers the 4790k can support. The operating system can select a subset, thereby controlling the cpu, based on the power plan profile.

    Checking Intel's XTU, the Core Frequency (average of all 4 cores) is 4.37 GHz and the graph -- red line -- remains constant for 5 minutes. Individual Core Frequencies are shown in the HWiNFO64 data table with similar results. So, the cpu is in a steady Turbo Boost state. This is in accordance with Samsung Performance Power Plan.

    The lowest multiplier I see is x40 -- the base frequency. Most of the time the multiplier is at x44 with occasional (very short duration) drops to x43. Again, looking at XTU, CPU Utilization -- blue line -- is at 1% (idle) and Package Temperature is 36C... very comfortable even at 4.37 GHz.

  • Rgon_Amps

    13 Posts

    17539

    0

    Posted November 9th, 2015 19:00

    (Sorry, duplicate post)

  • Rgon_Amps

    13 Posts

    17539

    0

    Posted December 17th, 2015 09:00

    Hello nattyd,

    Yes, I used the stock Dell fan/heatsink. The i7-4790K box includes Intel's fan/heatsink, but the heatsink is half the size of the Dell unit. I strongly suggest using the larger Dell heatsink.

    My 9020 MT is working perfectly with Windows 10 Pro Build 10586. I'm very pleased with the 4790K performance. Good luck with your upgrade.

  • speedstep

    11 Legend

    •

    46969 Posts

    17552

    1

    Posted December 18th, 2015 05:00

    The Intel heatsink uses plastic push pins.  IMHO its a bad design.  Stock dell heatsink works fine with 4790k.

  • Sergio Orru

    1 Rookie

    •

    10 Posts

    17552

    0

    Posted August 9th, 2016 14:00

    Hi Rgon,

    Do you think if this processor works on the SFF (Optiplex 9020) model? I saw on your CPU-z print that the model of the main board is the same. Is Q87 model.

    I currently running with the i5 4590.

    Did you recommend this upgrade?

    Best Regards!

  • Rgon_Amps

    13 Posts

    17552

    0

    Posted August 9th, 2016 23:00

    Hi Sergio,

    Yes, Intel does support an i7-4790k on a Q87 motherboard. The 4790k was a drop-in replacement for the i5-4570 in my MT machine. Make sure your bios is current. Notice A13 rev on XTU.

    I run the 4790k in continuous Turbo Boost and the performance is excellent. Even with no OC support, you'll see a considerable performance improvement over an i5.

    Glad I upgraded. Hope you are encouraged to upgrade as well.

    Cheers,

    Rgon

  • edwardwikcs

    1 Message

    17552

    0

    Posted August 10th, 2016 00:00

    I have  classic Optiplex  model , do change classic model to this new Optiplex 9020 MT i7-4790k

  • Sergio Orru

    1 Rookie

    •

    10 Posts

    3671

    0

    Posted August 10th, 2016 08:00

    Thanks a lot for answering Rgon,

    My current version of Bios is A16 is the most recent version, i think that is not a problem. I will try this upgrade, and come back with the details!

    Best Regards!

  • Sergio Orru

    1 Rookie

    •

    10 Posts

    3671

    0

    Posted December 18th, 2016 11:00

    Just to update to you guys,

    I recently upgraded my Optiplex 9020 SFF with the amazing i7 4790k.

    Follow two links with the diference before <> after the upgrade

    Using i5 4790:

    https://browser.geekbench.com/v4/cpu/895173

    Using i7 4790k:

    https://browser.geekbench.com/v4/cpu/1363403

    I running constantly in 4.3Ghz tunned by Intel XTU.

    No issues of temp at all. The coolers that came with this dell is good.