UNSOLVED

TripleHWestern

updated

19 years ago

0

469273

May 5th, 2008 11:00

OptiPlex 755 mysteriously turns itself on

I recently purchased a Dell OptiPlex 755 computer and am having a mysterious power on issue.  Although it came with 32 bit Vista Business, I installed the 64 bit version.  Ever since I've had the computer (approximately 1 month), the following issue occurs (not everytime but frequently):

 

  1. Cold boot PC and use it normally
  2. At the end of the day, click Start | Shutdown
  3. PC shuts down and turns off.
  4. A few seconds to a few minutes later, the PC powers on itself but never boots to Windows.  Instead, receive a blank, black screen on the monitor and the fan is really loud (sounds like the PC is going to take off).  Along with the power button, only the numbers "3" and "4" are lit green.  If you press and hold the power button in, the machine shuts off for approximately five seconds and then powers on again going right back to the blank black screen, etc. etc.  It stays in this loop until I press and hold the power key and as soon as it powers off, I remove the power cable from the back of the machine.  Once I leave the power cable disconnected a few seconds, plug it back it, the machine will boot to Windows just fine. 

This is the strangest thing I've seen.  Admitedly, I have not yet contacted Dell as I have tried to figure out the sequence of events that consistently puts the machine in this state. 

 

I welcome any and all ideas regarding this matter.

  • Hydralisk00222

    2 Intern

    •

    2440 Posts

    6414

    1

    Posted May 5th, 2008 16:00

    Make sure wake on lan in bios is off...

     

    this happened to me as well but it stopped as time passed... couldn't figure out the underlying cause.

  • 6414

    1

    Posted May 5th, 2008 23:00

    I just checked the BIOS; Wake-On-LAN is disabled.  Thanks for the suggestion though.
  • sukebe65

    25 Posts

    6414

    1

    Posted May 9th, 2008 19:00

    What BIOS rev do you have?
  • 6414

    1

    Posted May 10th, 2008 14:00

    A09
  • 6414

    1

    Posted May 13th, 2008 10:00

    Reseating the memory and disabling "Automatic Restart" under Advanced System Properties | Startup and Recovery | System failure seems to have resolved this issue.
  • 6414

    1

    Posted May 26th, 2008 22:00

    After 20 days, the problem just reoccurred.  Reopened case with Dell.
  • 6415

    1

    Posted May 26th, 2008 22:00

    Dell is sending out a new motherboard.
  • eboe

    7 Posts

    3590

    1

    Posted July 31st, 2008 12:00

    Cool, thanks. The one difference we have is that we are running XP Pro, but realistically, the problem seems to be there regardless of the OS, and therefore it has to be a BIOS problem or something in the power staging on the motherboards, or possibly, the chipset. Ugh.

     

    Thansk for the quick reply as I am getting ready to head out to a client with the problem and I am 90% sure we have already flashed all the motherboards. I might try unplugging the UPSes if they are plugged into the USB ports, and report back to you as well. Together we can lick this problem, or make Dell lick it for us ;)

     

    Gary

  • eboe

    7 Posts

    6415

    1

    Posted July 31st, 2008 12:00

    TripleH, did the replaceemnt motherboard fix the problem? Just curious, as we have deployed quite a few 755s that have given us similar problems, where they will only boot if unplugged, and of course Dell asked about Bios updates, and that had not done the trick either...
  • 6415

    1

    Posted July 31st, 2008 12:00

    No it didn't actually. The problem seems to have gone away, however I'm not sure what fixed the issue as I made two system changes at the same time.  I had an APC battery backup plugged in via USB.  I was also running the 64 bit version of Windows Vista Business Edition.  I unplugged the battery backup and reinstalled the 32 bit version of Windows Vista.  The problem went away.  I haven't tried plugging in the battery backup yet to see if the problem reappears.  I will try that and post the results here in the future.