UNSOLVED

malz

updated

24 years ago

M

malz

327 Posts

0

1656

August 7th, 2002 05:00

Networking Two XP Pro.

Ok, i've got a DLink 4 port Router, two computers both running XP Pro and connected to the router. Both can use the Internet (through the router and via cable modem).

I've tried to run the XP Professional Network Setup Wizard but it didn't work (I feel retarded... lol).

Anyawy, does anyone have any advice or any sites that can explain how to network two XP Pro running computers through a router? Stupid File sharing. =D

Thanks in advance.

  • bluerose124

    69 Posts

    472

    0

    Posted August 7th, 2002 12:00

    Hello! If I understand your comments correctly, you can accesss the internet, via the router from both computers. But having problems sharing files from one computer to the other.
    I have my two computers ( 1-Dell Dim, with XP Pro 2-old clone with 98se) connected via a Linksys router.
    This is what I do to share files from one computer to the other:
    From-computer (in Wins. Explorer)
    right-click the file/folder you want to share
    click-sharing (from popup menu)
    click-Share As
    click-o.k.

    To-computer (in windows Explorer)
    click - entire Newtwork left column
    click-Mic. Wins Network right-side window
    click-Workgroup
    click-computer name (should show here the computer name of your other computer)
    click-Download (file name)

    When done, makesure you go back to the first computer and disable file sharing. It is a security hazard to leave file sharing turned on.

    Hope this ios what you are looking for.

  • rickmktg

    2 Intern

    •

    11898 Posts

    472

    0

    Posted August 7th, 2002 13:00

    See my link below for networking an XP machine to a non-XP machine, also applies for XP to XP machines.

    I don't agree on the File Sharing hazard. If you have a router, the NAT in it will protect you. In addition, you should run a firewall like ZoneAlarm.

    A good site for info is practicallynetworked.com.

    Rick

    SOLUTIONS

    To select the correct Crucial memory for your computer, try the Crucial Memory Configurator

    Get your order status - 1-800-433-9014

    Clean your screen - turn off your PC. Use a damp soft cloth. Wipe screen carefully, then buff dry with another soft cloth. Then wipe your keyboard and pointer area, avoiding the pointer tip.

    Don't upgrade your Norton Antivirus! Buy it new or SystemWorks or Internet Security (each of which contain Antivirus), and take advantage of their FREE after rebate promos that run all the time - just keep your eyes open. When the new Quicken comes out Antivirus will be free, also when TurboTax comes out. Lots of chances to not spend money to upgrade!

    For savings off purchases at hundreds of websites (including Buy.com, JCrew, Nordstrom, Old Navy, Overstock.com, ...), send me a DellTalk message and I'll send you details. Click on the envelope at the top of this window.

    For FREE Comcast High Speed Internet Installation , send me a DellTalk message and I'll send you details. Click on the envelope at the top of this window. Only valid for Comcast Cable subscribers.

    Why can't I track my UPS package? Per Dell-Chandler - The packages are picked up from Dell by UPSLG, which is owned by UPS. UPSLG doesn't scan the packages. They deliver the packages to UPS' regional hubs where they then will receive the initial scan. During the time from when they are picked up from Dell to the time they are scanned at the UPS regional hub, they are not able to be tracked. As soon as they reach the UPS regional hub they will be scanned in to UPS' system, which, depending on where you live, could take as long as 3 days..

    Networking XP and non-XP machines? ,
    Read this

    CONFIGURATIONS

    Dell I8100 512MB RAM, 20GB HD, Windows ME.

    Dell XPS B600R 384MB RAM, 30GB Quantum Fireball Plus and 40GB Maxtor DiamondMax Plus HD, Windows 98SE.

    Dell XPS D333 256MB RAM, 80GB Maxtor D740X with Maxtor 133 card and 8.5GB HD, Windows XP.

    100 mbps network with Comcast High Speed cable modem. 2 HP Laserjet 4L printers, 2 HP Inkjet printers, scanner.
  • malz

    327 Posts

    472

    0

    Posted August 7th, 2002 21:00

    We're running two XP Pro machines. Both are hooked to the router and have internet access.

    Neither can share files with one another. I really don't have any idea how to do what you mentioned in your previous posts.

    When I do the following suggestion:

    - To-computer (in windows Explorer)
    - click - entire Newtwork left column
    - click-Mic. Wins Network right-side window
    - click-Workgroup
    - click-computer name (should show here the computer
    - name of your other computer)
    - click-Download (file name)

    I can get to the "click workgroup" step. When I click the workgroup (in this case it's named "OURS") after about a 2 minute pause an error message comes up that says:

    "Ours is not accessible. You might not have permission to use this network resource. Contact the Administrator of this server to find out if you have access permissions.

    The list of servers for this workgroup is currently unavailable."

    Any idea what to do? It's really frustrating. =/ Thanks.

  • bluerose124

    69 Posts

    472

    0

    Posted August 8th, 2002 00:00

    Hello! When you get to workgroup in the steps (in your case it says- ours), does this happen with both computers, when you try these steps?
    Once you click on workgroup (ours) the next set should show the two computer names you have, in my case one is called "old computer" and the other is called "our computer". These two names are now listed there.
    If neither computer, lists both computer names after clicking on workgroup, looks like they are not seeing each other.
    Out of curiousity, do you have a printer hooked up to one computer and can print from the 2nd computer? If so, they should be seeing each other.
    When I was setting up the network through the Linksys router I have for the two computers I had a problem being able to print from the 2nd computer (printer hooked up to 1st computer with WinsXP Pro) and I couldn`t share files between computers.
    Turns out, when I installed XP I gave a password for Administrator, but did not create a password for my User Account. Once I created the password for my user account, I could share the printer and share files, following the above steps.
    Also, according to documentation (I`ll give you link, further down) had to turn off firewall within Wins XP.
    Have you turned off the firewall within XP?

    http://www.practicallynetworked.com/sharing/xp_filesharing/03userpasswords.htm
    This article is WinXP Pro File sharing, talks about turning off the firewall within XP to share files.
    At the end of this article (if after doing this, still can`t get them to see each other), there are further links to other articles about troubleshooting file/printer sharing.
    As I said above, once I turned off the firewall within XP and setup a password for my user account, it all worked fine.

    Here is another link to another site for networking troubleshooting (just in case)
    http://www.homenethelp.com/

  • malz

    327 Posts

    472

    0

    Posted August 8th, 2002 01:00

    After turning off the firewall on both computers (thought they were already off for some reason, my mistake), I can now access the "OURS" workgroup through Windows Explorer. However, Her computer can see but not access mine and my computer can not see either computer on the "OURS" network.

    I'm not sure what's going on, but it's really frustrating. ;) Thanks for the help so far, any more ideas?

  • 472

    0

    Posted August 8th, 2002 17:00

    Go against the advise on practicallynetworked.

    Go ahead and load the the Netbios IPX/SPX protocols on both XP machines.





  • 472

    0

    Posted August 9th, 2002 07:00

    Did you turn on the netbios setting as I suggested above.

    Do so and then match the protocols onm all machines. So also with any WIN98 machines on the network.

    I had just about given up on XP peer-to-peer until trying this. Now it works flawlessly.