Seems like nobody is wanting to recommend this even though a couple of posters have done it. And we don't know what the long term results would be.
A couple of reasons not to would be because your PSU has no 6 Pin PCI-E power cable which the 7900GT needs and you would have to use 4 Pin molex Y cable splitters to get power from your optical drive. And the MFG wattage and +12 volt amperage recommendations are much higher than even your PSUs conservative ratings.
A better solution would be a PSU like that in my E510, it has 450 watts, 26 Amps on the +12 volt rail and is a easy fit into the 5000,5100 and E510/5150.
Oletymer
2 Intern
•
977 Posts
62
0
Posted July 6th, 2006 14:00
Seems like nobody is wanting to recommend this even though a couple of posters have done it. And we don't know what the long term results would be.
A couple of reasons not to would be because your PSU has no 6 Pin PCI-E power cable which the 7900GT needs and you would have to use 4 Pin molex Y cable splitters to get power from your optical drive. And the MFG wattage and +12 volt amperage recommendations are much higher than even your PSUs conservative ratings.
A better solution would be a PSU like that in my E510, it has 450 watts, 26 Amps on the +12 volt rail and is a easy fit into the 5000,5100 and E510/5150.
http://www.newegg.com/Product/Product.asp?Item=N82E16817104154
XPS400--Pentium D 830@3.0 GHz--1 Gig PC5300 DDR2@667MHz
GigaByte X800XL PCI-E@430/1080--- Stock 375 Watt PSU.
Dell UltraSharp 1905FP 19" LCD.
E510---Pentium 4 630@3.0GHz--1 Gig Corsair PC4200@533MHz
XFX 6800GS PCI-E@485/1100----OCZ Modstream 450 Watt PSU.
Dell E196FP 19" LCD.
Gateway E6500D-- Pent.4 660@3.6 GHz 800MHz FSB HT.
2Gigs Samsung PC4200@533MHz
eVGA 7900GT CO Superclock @ 590/1750
OCZ Modstream 520 Watt PSU.--Gatway FPD 1975 19" LCD(8ms)