
UNSOLVED
Inspiron 580, PCIe x16 troubles
Hello all,
I have a Inspiron 580 that Im trying to add a video card to.
The card I want to add is a galaxy GeForce 8400 GS PCIe x16.
Everything that I can see checks out as far as requirements go, but when I install the card - Win7 does not recognize it.
I have updated the BIOS, reseated the card, tested the card in another system and had no issues.
Any Ideas?
Responses (11)
Solutions (0)
DELL-Manpreet C
343 Posts
2100
0
Posted July 31st, 2012 17:00
Hi F4u5T,
I would like to inform you that the Inspiron 580 series has been tested with graphics cards such as nVidia GT220, AMD Radeon HD 5670, AMD Radeon HD 5450, NVIDIA® GeForce® G 310.
I would like to know if there was any graphics card that you received with the computer.
There could be a possibility of the PCI slot failure as the graphics card is functioning properly with another computer. However, I request you to check the power supply compatible with the Geforce 8400 GS before we come to that conclusion.
Moreover, the graphics card such as NVIDIA GT220 and AMD Radeon 5670 could also be taken into consideration as both the graphics card provide 1GB of video memory.
You could also try one of these card and see if it works.
Please reply for further queries.
It would not be a power supply issue. When you say W7 does not recognize it, does your computer post? Do you get to the desktop or is there just a black screen? Do you get to a point where you can install the Nvidia driver? Have you tried starting in safe mode?
Sorry - this is no help and more of a major rant than anything else. I am totally amazed that in all of my searches for installing an NVIDIA card that there are no workable solutions for the "compatible device not found", and "Plug and Play" not recognizing the device. The Inspiron 580 DOES NOT provide access to its BIOS settings through F2 or any other boot time key press. The Inspiron 580 bios is set to use the on-board video controller (Intel). The only way to change these and related PCI and video setting are through the CCTK (I think). Great. What are the BIOS setting configuration dependencies? I would really love to go in there with the CCTK and try different settings and blow up my system. Before any overly enthusiastic Dell employee whips out a stock answer, they should grab hold of an Inspiron 580 and an NVIDIA graphics card to make sure they're just not spewing BS to inflate their quarterly performance review. I am frustrated and really kind of pissed off in a major way about this whole issue, the lack of information, and the demonstrated rampant incompetency from Dell, Intel, and Microsoft. No - I will not pay for "premium" support on this. This is Dell's problem and the problem existed when the first Inspiron 580 was put together.
howlingdog89
1 Message
2100
0
Posted December 25th, 2013 09:00
I have the same computer and wanted to install an ASUS Geforce en210 PCIe card. It has the Nvidia chip. I couldn't get it working through Win7 with PnP either. But, after downloading drivers from the Nvidia site, I got it working fine. So, it seems you need to use the onboard video to be able to function and download, etc. Then run the drivers and updates. Your 580 should then pickup up the Nvidia card. I have mine with two monitors hooked up. You can use two at a time. All three work on mine.
Give that a try. Hope it works out for you.
I am about to try to install a different video card with the NVidia chip. The fundamental problems are that the latest and greatest Inspiron 580 bios A07 does not provide access to video controller options. No access is provided to the PCI 16x bridge. The "have disk" methods to get around PnP have not helped. In my frustration with this problem I have annoyed the forum gods with abusive language, I know that somewhere there is a Dell expert that knows the real way to make this work. If I get this to work, I will post what I did to make it work.
it seems that the BIOS will recognize by it self if there is VGA card installed or not and it will automatically change to the VGA if it detected it
but in my case I've tried high-end VGA card 470 Super Clocked and of course i changed the Power Supply
and it didn't work
when i put low end VGA card like 7300GS it worked from the 2nd time i tried
so it seems that this computer is not made to support high end gaming VGA cards
i really hope that there is an option to change the VGA manually from the BIOS

Dale Nihiser
2 Intern
•
2030 Posts
2100
0
Posted July 29th, 2012 22:00
With the video card installed, enter your bios (Press F2 during post) and attempt to change the setting to make the pci-e x16 the default video setting (if allowable). Save and exit and see if your card is recognized.
Good Luck
Dale