
UNSOLVED
S
Shadowmage
53 Posts
0
35383
December 31st, 2005 01:00
How to force a flash for Dell Precision M70?
Hi,
Dell shipped me a replacement motherboard, but it was a Latitude D810 motherboard. I'm trying to flash this back to M70, but the utility doesn't work. How do you force a flash?
Going into DOS and doing M70_A03 -forceit does not work either.
Also, now my thermal sensors are off bc it says I need to run Diagnostics first. I have run Diagnostics off my flash drive but they're still off! HELP!
Dell shipped me a replacement motherboard, but it was a Latitude D810 motherboard. I'm trying to flash this back to M70, but the utility doesn't work. How do you force a flash?
Going into DOS and doing M70_A03 -forceit does not work either.
Also, now my thermal sensors are off bc it says I need to run Diagnostics first. I have run Diagnostics off my flash drive but they're still off! HELP!
Responses (16)
Solutions (0)
Shadowmage
53 Posts
334
0
Posted January 2nd, 2006 00:00
This is completely unfair and uncalled for. I paid for a Dell Precision M70. The motherboard was damaged under warrenty and Dell sent me a D810 motherboard with no method to reflash back into M70.
Moderators, please explain what's going on.- Since the motherboard for the Latitude may have slightly different features than the motherboard for the M70, it is probably a very good idea that you can't interchange BIOS versions. I would call Dell back and have them send you another board.As for the moderator..... these forums are basically a user helping user format. Although there are Dell Moderators around their main purpose is to oversee the forums and the conduct of the people using them. With the exception of a few moderators, they seldom get involved in forum discussions. In fact from my experience the forums related to home systems have the greatest moderator participation while the business line has the least.
Message Edited by Majestic on 01-02-2006 08:14 AM
Shadowmage
53 Posts
334
0
Posted January 2nd, 2006 15:00
Nope, they are exactly identical. Supposedly a CD got sent with the mobo that could force the flash but evidently they forgot to include it with mine.- I'm not familiar with that switch. The one that Dell tech support had me use when I had to flash my replacement board was "/forcetype". Command was issued from a DOS prompt after booting a bootable diskette with the downloaded flash BIOS updater on it. (Make sure you have the A/C adapter plugged in, otherwise the updater will refuse to work.
I hope you get your system straightened out. Dell really needs to get this procedure down and documented for the sake of the field service personnel and their end users. I went through this same mess last week. If it's any consolation, my system is working fine so far with the new motherboard.
It's all pretty weird, really. The first support tech I got told me that the D810 and M70 motherboards were NOT the same (different "chipsets"). Another tech later told me that this was not so. It sounds like there hasn't been a lot of effective communicating going on.Message Edited by Grogg on 02-10-2006 01:57 PM
Shadowmage
53 Posts
334
0
Posted February 11th, 2006 19:00
Hi, thanks for the responses.
However, both jabil and forcetype did not work.
@Shadowmage wrote:
Hi, thanks for the responses.
However, both jabil and forcetype did not work.
Wow! That's really weird! What the heck is going on?
You booted from a DOS diskette with the BIOS update executable on it and issued the command, including the /forcetype switch, at the command line interface -- and it still didn't work?I had the same situation as you. Fried a M70 board, got it replaced wit ha board that had a D810 BIOS. The service technician CD did not have a BIOS for the M70.
However I was successfully able to change the BIOS. Good luck.
What is the message you get when trying the switches /jabil or /forcetype ?
~M

Majestic
2 Intern
•
9371 Posts
334
0
Posted December 31st, 2005 11:00