
UNSOLVED
Flash Bios for 670 and RAID 1conflict
I tried installing Version A06 Flash Bios update for the 670 twice, and each time it wouldn't boot afterwards. (I have never had a problem with a Dell Flash Bios on any of my computers previously, and I've done all the updates when available.) In the first case I tried several approaches suggested by Dell Tech Support but in the end I had to go back to A05. The second time Dell Tech Support gave me a different suggestion for dealing with it and eventually it did boot, but with the the RAID array lost. I reinstalled A05 and then rebuilt the RAID array, and gave up on A06. Now A07 is out. Has anyone else had a problem like I did with A06, and if so any experience with A07?
Responses (9)
Solutions (0)
- Thanks for the information. I am running dual Xeons (but not dual core) using the built in RAID on dual SATA 10000K drives. It is a circa September 2004 computer. It isn't free of problems; I often reboot one to four times a day, but I blame that mostly on my software, ArcGIS. I had no problems with flash updates through A05 on it but the experience with A06 has made our computer guy leery of doing anything that is not necessary. Do you have any thoughts on whether the A07 update is worth the hassle given the possibility it could also disrupt the RAID or fail to complete a boot and we have to reflash back to A05? Or any suggestions for reducing that risk?
- BIOS A6 Update:
1. Extend support for processors with more than one core and level 2 cache.
2. Improve initialization of USB mice and keyboards for many operating
systems.
3. Improve reported details on identification of defective memory DIMMs.
4. Improve the help text on the SpeedStep setup screen and correct minor
parsing errors in the CMOS clock time change function.
5. Extend support of SpeedStep to some newer processors.
6. Improve support of USB devices behind USB 2.0 hubs.
7. Improve the accuracy of the reported cause of a system wakeup to the OS.
8. Update microcode tables for current and new processors.
9. Add support for flashing the BIOS from Linux (from A05 BIOS and newer).
10. Improve handling of some hard drive configurations when the BIOS is
set back to its default state.
11. Improve support for 3 or more hard drives.
12. Improve performance on a few memory and I/O intensive benchmarks.
13. Fix support for certain complex PCI-X cards in slot 6.
BIOS A7 Update:
1. Improve support for PCIe add-in cards and display adapters.
2. Improved password security.
3. Fixed several minor user interface issues when replacing a motherboard,
configuring SATA drives or setting the date and time in setup as well as
in some flash program special case handling.
4. Improved handling of remote system wake up after a power failure.
5. Improve support for some USB 1.1 devices.
6. Improved Linux flash support error handling and error messages.
7. Improve support for dual channel NICs.
It is always nice to have the latest BIOS installed. I am not sure if any of the above enhancements may correct problems you could experience.
I would try to determine why you are having to re-boot so many times with the
ArcGIS application: the application may be resource intensive and may require more memory or faster drives: One day your Raid 1 could crash during a re-boot, and the data could be corrupted beyond retrieval: I had a Raid 1 configuration and one drive failed when I replaced the second drive it created havoc and I lost the entire Raid.
For my resource intensive database applications I use 15K SCSI drive, and backup my data files to a second drive. I have not experienced any drive failure in years. - Thanks again for the information. In the next 2-3 months we expect the next major upgrade of ArcGIS to come out and we'll probably do a clean install of everything at that time, which will include A07, and we'll see then if the RAID 1 will be compatible with it.
Not sure if this will help you, but I've got a Precision 670 - single XEON 3.6 ghz 1 mg cache that I purchased. It had A02 on it. I flashed A07 and was not able to boot, flashed A06 and was not able to boot.
After reading your thread, I flashed with A05 and it was able to boot again. I contacted Dell and it turns out A05 is the latest BIOS update for this machine's motherboard version. A06 and A07 was meant for the new 670 MB that support new processors. Per her comments, the TS site should have distinguished the difference in BIOS support.
Hope this helps.. See log below:
05/11/2006 12:15:47PMAgent (GTSR Tammy Humphrey): "I am not sure why the support site does not distinguish the BIOS revisions. Versions A06 and A07 are for a newer motherboard with newer processor support. For this system A05 is the most current- Here's another thing a friend told me to watch out for that I never thought would cause so much grief:If the electric demand of the system is very high your computer may not be able to deal with it (lots of drives, add-ons, fans, aftermarket parts that demand more electricity, lots of USB/Firewire devices, lots of PCI cards, double video cards, etc), according to a computer technician I spoke with about my Precision this can be a cause for freezes and other problems. Just something to add onto the equation.I updated my video card driver on my 670 and after that I continue to get Rundll32 errors when closing programs. I have done some google searches but can't really pin-point what could be going on.Currently I am just trying to figure out what the model of my mother board is. Does anybody know?Thanks!
- You are correct, there is a limit on the amount of peripherals' that can be added to the 670 before power overload. Also keep in mind that some PCI & PCI-e graphics cards will also consume a substantial amount of available ram.
I believe the problem with flash BIOS & Raid configurations may reside on the RAID card and initial Raid setup parameter.
Some Raid cards, when building an array will validate and lock in a snapshot of the system setup. When any of those parameters change the Raid array may/will fail:
Some Raid cards will lock in Bios information, drive's firmware, capacity, and even offset geometry of a drive, if one fails, it will require an identical one, if any of other "locked" Raid parameters change, the array may fail or will not rebuild:
There is a lot of info on these Raid caveats, that's why I stopped using Raid configurations when the new U320 10K 300GB & 147GB 15K drives came out; the speed and reliability of dealing with individual drives outweigh the slight added benefit of Raid; for desktop/workstation use.
My motherboard is the 0U7565: I am not sure the number of revisions on the board, I can only presume a change was made when dual-cores were introduced, but the 06 Flash Bios provides Bios information if dual-core are installed, indicating the 0U7565 motherboard supports dual-core.Message Edited by Chipstone on 05-30-200601:52 PM
JLA ENTERPRISES
20 Posts
616
0
Posted August 1st, 2006 12:00
We just updated the Bios from 06 to 07 on one of our Precision 670's with Dual Core Xeons. We are running a RAID 0 array and there were no problems whatsoever.

Chipstone
525 Posts
616
0
Posted April 20th, 2006 14:00
Sometimes the Bios flash will reset some parameters that interferes with the RAID snapshot of the system at a given time; especially when the Rid was created. Sometimes when it detects several changes, not part of the original Raid setup will fail:
During Bios updates, sometimes the primary boot device is reset to look at the build in controller, or some devices are reset to off, and the Raid 1 setup may look at these changes and depending on the Raid parameters it may no longer recognize the original setup.
I no longer use Raids in any of our Workstations due to previous issues with changes to the system and the Raid would fail.
I am not sure if you are using the build in raid or a PCI PERC card: It will be difficult to trouble shoot what is actually making the Raid 1 fail when you are upgrading Bios, since several enhancements were made with A6 & A7 bios.